Related papers: Fatigue crack growth in bearing steel under cyclic…
For the fatigue life of thin-walled components, not only fatigue crack initiation, but also crack growth is decisive. The phase-field method for fracture is a powerful tool to simulate arbitrary crack phenomena. Recently, it has been…
Fatigue crack growth is decisive for the design of thin-walled structures such as fuselage shells of air planes. The cold rolling process, used to produce the aluminium sheets this structure is made of, leads to anisotropic mechanical…
Predicting potential risks associated with the fatigue of key structural components is crucial in engineering design. However, fatigue often involves entangled complexities of material microstructures and service conditions, making…
The damage mechanisms and load redistribution of high strength TC17 titanium alloy/unidirectional SiC fibre composite (fibre diameter = 100 $\mu$m) under high temperature (350 {\deg}C) fatigue cycling have been investigated in situ using…
We introduce a class of models based on near crack tip degradation of materials that can account for fracture growth under cyclic loads below the Griffith threshold. We incorporate the gradual degradation due to a cyclic load through a flow…
Cast and HIP'ed \textgamma-TiAl 4522XD is being developed for use in jet engine low pressure turbine blades, where temperature variations occur through the flight cycle. The effects of temperature variations on fatigue cracking were…
A planar crack generically segments into an array of "daughter cracks" shaped as tilted facets when loaded with both a tensile stress normal to the crack plane (mode I) and a shear stress parallel to the crack front (mode III). We…
We discuss steady state crack growth in the spirit of a free boundary problem. It turns out that mode I and mode III situations are very different from each other: In particular, mode III exhibits a pronounced transition towards unstable…
The fracture toughness for a mode I/II crack propagating in a ductile material has been subject to numerous investigations. However, the influence of the material hardening law has received very limited attention, with isotropic hardening…
Phase-field fracture models provide a powerful approach to modeling fracture, potentially enabling the unguided prediction of crack growth in complex patterns. To ensure that only tensile stresses and not compressive stresses drive crack…
The shear strength of a pre-cracked sandwich layer is predicted, assuming that the layer is linear elastic or elastic-plastic, with yielding characterized by either J2 plasticity theory or by a strip-yield model. The substrates are elastic…
Fatigue crack growth in ductile materials is primarily driven by the interaction between damaging and shielding mechanisms. In the Paris regime, the predominant mechanism for retardation is plasticity-induced crack closure (PICC). However,…
A theoretical study based on dimensional analysis and fractal geometry of crack profiles is proposed to establish the relation between their fractal dimension D (1<D<2) and the parameters defining the fatigue crack propagation rate. The…
This paper explores the global Mode I fracture energy of a carbon fiber composite subject to a biaxial stress state at a crack tip, specifically in which one stress component is compressive and parallel to the crack. Based on an…
A new model is presented to predict hydrogen-assisted fatigue. The model combines a phase field description of fracture and fatigue, stress-assisted hydrogen diffusion, and a toughness degradation formulation with cyclic and hydrogen…
Predicting the growth of large cracks in brittle materials is a fundamental unresolved problem in fracture mechanics. Under out-of-plane shear loading, an initially planar crack may fragment into multiple cracks, forming an echelon crack…
The sensitivity of crack growth resistance to the choice of isotropic or kinematic hardening is investigated. Monotonic mode I crack advance under small scale yielding conditions is modelled via a cohesive zone formulation endowed with a…
This work models brittle fracture using a linearized surface-substrate theory in which the crack faces possess surface stresses derived from a surface strain-gradient elastic energy. The model incorporates surface stretching, curvature, and…
In earlier papers (Leblond et.al., 2011, 2019), we presented linear stability analyses of the coplanar propagation of a crack loaded in mixed-mode I+III, based on a "double'' propagation criterion combining Griffith (1920)'s energetic…
The paper addresses the problem of a Mode III interfacial crack advancing quasi-statically in a heterogeneous composite material, that is a two-phase material containing elastic inclusions, both soft and stiff, and defects, such as…