Related papers: Identification of Substation Configurations in Mod…
Topology identification (TI) in distribution networks is a challenging task due to the limited measurement resources and therefore the inevitable need to use pseudo-measurements that are often inaccurate. To address this issue, a new method…
In a power distribution network, the network topology information is essential for an efficient operation of the network. This information of network connectivity is not accurately available, at the low voltage level, due to uninformed…
Accurate network topology information is critical for secure operation of smart power distribution systems. Line outages can change the operational topology of a distribution network. As a result, topology identification by detecting…
Operations of substation circuit breakers are important for maintenance needs and topology reconfiguration in power systems. Bus splitting is one type of topology change where the two bus bars at a substation can become electrically…
The real-time transient stability assessment (TSA) plays a critical role in the secure operation of the power system. Although the classic numerical integration method, \textit{i.e.} time-domain simulation (TDS), has been widely used in…
Operating modern power grids with stability guarantees is admittedly imperative. Classic stability methods are not well-suited for these dynamic systems as they involve centralized gathering of information and computation of the system's…
Faced with increasing penetration of distributed energy resources and fast development of distribution grid energy management, topology identification of distribution grid becomes an important and fundamental task. As the underlying grid…
Distribution grid is the medium and low voltage part of a large power system. Structurally, the majority of distribution networks operate radially, such that energized lines form a collection of trees, i.e. forest, with a substation being…
Accurate topology information is critical for effective operation of power distribution networks. Line outages change the operational topology of a distribution network. Hence, outage detection is an important task. Power distribution…
Rising electricity demand and the growing integration of renewables are intensifying congestion in transmission grids. Grid topology optimization through busbar splitting (BuS) and optimal transmission switching can alleviate grid…
As a ubiquitous deployment paradigm, integrating microservice architecture (MSA) into edge networks promises to enhance the flexibility and scalability of services. However, it also presents significant challenges stemming from dispersed…
Accurate grid topology information is of paramount importance for routine power system operations, while the growing availability of synchrophasor data offers the opportunity to identify topology changes in real time. Identification of bus…
To perform any meaningful optimization task, distribution grid operators need to know the topology of their grids. Although power grid topology identification and verification has been recently studied, discovering instantaneous interplay…
Distribution grids represent the final tier in electric networks consisting of medium and low voltage lines that connect the distribution substations to the end-users. Traditionally, distribution networks have been operated in a radial…
The power network reconfiguration algorithm with an "R" modeling approach evaluates its behavior in computing new reconfiguration topologies for the power grid in the context of the Smart Grid. The power distribution network modelling with…
The increasing deployment of end use power resources in distribution systems created active distribution systems. Uncontrolled active distribution systems exhibit wide variations of voltage and loading throughout the day as some of these…
Transmission switching (TS) has gained significant attention recently. However, barriers still remain and must be overcome before the technology can be adopted by the industry. The state of the art challenges include AC feasibility and…
To perform any meaningful optimization task, power distribution operators need to know the topology and line impedances of their electric networks. Nevertheless, distribution grids currently lack a comprehensive metering infrastructure.…
Efficient control of power systems is becoming increasingly difficult as they gain in complexity and size. We propose an automatic control strategy that regulates the mechanical power output of the generators in a power grid based on…
Modern AI systems increasingly comprise multiple interconnected neural networks to tackle complex inference tasks. Testing such systems for robustness and safety entails significant challenges. Current state-of-the-art robustness testing…