Related papers: An Explosively Driven Launcher Capable of 10 km/s …
Laser-driven plasma wakefields can provide hundreds of MeV electron beam in mm-range distances potentially shrinking the dimension of the actual particle accelerators. The plasma density plays a fundamental role in the control and stability…
A light emitting diode (LED) pulser has been developed that can be used for tests or calibration of timing and amplitude sensitivity of particle physics detectors. A comparative study is performed on the components and pulser output…
Positron creation and acceleration is one of the major challenges for constructing future lepton colliders. On the one hand, conventional technology can provide a solution, but at a prohibitive cost and scale. On the other hand,…
Space exploration is of paramount importance to advancing fundamental science and providing global services, such as navigation and communications. However, today's space missions are hindered by limitations of existing propulsion…
Two dimensional particle-in-cell simulations characterizing the interaction of ultraintense short pulse lasers in the range 10^{18} \leq I \leq 10^{20} W/cm^{2} with converging target geometries are presented. Seeking to examine intensity…
Underexpanded jets are present in various engineering applications; in recent years, they have gained special attention because of the development of gas-fueled propulsion systems. In these apparatuses, the direct injection of fuels such as…
The collisional excitation of methanol molecule in non-dissociative magnetohydrodynamic shock waves is considered. All essential chemical processes that determine methanol abundance in the gas are taken into account in the shock model. The…
The baseline configuration of the International Linear Collider requires 2 beam dumps per interaction region, each rated to 18MW of beam power, together with additional beam dumps for tuning purposes and machine protection. The baseline…
A pneumatic gun for ballistic delivery of microparticles to soft targets is proposed and demonstrated. The particles are accelerated by a high speed flow of Helium in a capillary tube. Vacuum suction applied to a concentric, larger diameter…
A high explosive shock tube of non-ideal gaseous plasma for proton radiography is described. The gas dynamic flow in the shock compressed xenon at initial pressure of 7 bar was investigated in the tube. The velocity of the shock wave in…
Micro hollow cathode discharges (MHCD) were produced using 250 m thick dielectric layer of alumina sandwiched between two nickel electrodes of 8 m thickness. A through cavity at the center of the chip was formed by laser drilling technique.…
In the ILC electron-driven positron source, acceleration tubes are located immediately downstream of the positron generation target to capture the generated positrons, necessitating high vacuum for their operation. We designed a rotating…
We report on the development of a fast neutron detector using a liquid scintillator doped with enriched Li-6. The lithium was introduced in the form of an aqueous LiCl micro-emulsion with a di-isopropylnaphthalene-based liquid scintillator.…
We present radiation-hydrodynamic simulations of radiatively-driven gas shells launched by bright active galactic nuclei (AGN) in isolated dark matter haloes. Our goals are (1) to investigate the ability of AGN radiation pressure on dust to…
Droplet velocities used in impact studies were investigated using high-speed photography. It was determined that droplets do not reach terminal velocity before a typical impact, raising the question of how to predict impact velocity. This…
We report on the design of a new type of electron gun to be used for experiments of infrared emission spectroscopy of rare gas excimers. It is based on a filament heated by means of a pack of rechargeable batteries floated atop the…
Injection and beam dumping is considered for a 16.5 TeV hadron accelerator in the current LHC tunnel, with an injection energy in the range 1 - 1.3 TeV. The present systems are described and the possible upgrade scenarios investigated for…
Laser-driven (LD) ion acceleration has been explored in a newly constructed short focal length beamline at the BELLA petawatt facility (interaction point 2, iP2). For applications utilizing such LD ion beams, a beam transport system is…
A vacuum-powered device that shoots ping pong balls at high subsonic speeds has been used for physics demonstrations for more than a decade. It uses physics that are easily understood by students, even though its operation is not…
For the injector Scheme-I test stand of the China-ADS, a beam with the maximum power of 100 kW will be produced and transported to the beam dump. At the beam dump, the beam power will be converted to thermal load and brought away by the…