Related papers: Proton Improvement Plan II Cryogenic Distribution …
Fermilab is committed to upgrade its accelerator complex to support HEP experiments at the intensity frontier. The ongoing Proton Improvement Plan (PIP) enables us to reach 700 kW beam power on the NuMI neutrino targets. By the end of the…
In the last ten years the use of proton beams in radiation therapy has become a clinical tool for treatment of deep-seated tumours. LIBO is a RF compact and low cost proton linear accelerator (SCL type) for hadrontherapy. It is conceived by…
We have prepared the new amorphous superconductor $\rm Mo_xC_yGa_zO_{\delta}$ with a maximum critical temperature $T_c$ of 3.8\,K by the direct-write nano-patterning technique of focused (gallium) ion beam induced deposition (FIBID) using…
Over the past decade, Fermilab has focused efforts on the intensity frontier physics and is committed to increase the average beam power delivered to the neutrino and muon programs substantially. Many upgrades to the existing injector…
The PLS-II has a 100 MeV pre-injector for the 3 GeV Linac. A thermionic gun produces electron charge of 200 pC with a bunch duration of 500 ps by a 250 ps triggering pulser. At the pre-injector, one of the most important beam parameters to…
The Mu2e experiment at Fermilab will search for the charged lepton flavour violating process of coherent neutrinoless muon-to-electron conversion in the presence of an aluminum nucleus. The muons are produced by an 8 GeV proton beam from…
Six 650 MHz high-power couplers will be integrated into the prototype High Beta 650 MHz (HB650) cryomodule for the PIP-II project at Fermilab. The design of the coupler is described, including design optimizations from the previous…
Cryogenic helium-4 has extremely small kinetic viscosity, which makes it a promising material for high Reynolds ($Re$) number turbulence research in compact laboratory apparatuses. In its superfluid phase (He II), helium has an…
The China ADS (C-ADS) project is proposed to build a 1000 MW Accelerator Driven sub-critical System around 2032. The accelerator will work in CW mode with 10 mA in beam current and 1.5 GeV in final beam energy. The linac is composed of two…
The new generation internal beam dump of the Super Proton Synchrotron (SPS) at CERN will have to dissipate approximately 270 kW of thermal power, deposited by the primary proton beam. For this purpose, it is essential that the cooling…
Accurate temperature regulation is critical for amperometric DNA analysis to achieve high fidelity, reliability, and throughput. In this work, a 9x6 cell array of mixed-signal CMOS distributed temperature regulators for on-CMOS multi-modal…
In recent years, the possibility of direct production of the 99mTc isotope (bypassing the parent 99Mo stage) for medical purposes using nuclear reactions on charged particle beams has been actively discussed around the world [1,2]. At A.I.…
The full conceptual design report is presented for the 3 T superferric dipole for the proposed electron-ion collider JLEIC. It features a novel superconducting cable-in-conduit (CIC) winding that provides stress management, excellent field…
Spallation source dedicated for neutron scattering experiments, as well as multi-purpose facilities serving several applications call for pulsed mode operation of a high intensity proton linac. There is general agreement on the…
CUPID is a next-generation neutrinoless double-beta decay experiment that will require cryogenic light detectors to improve background suppression, via the simultaneous readout of heat and light channels from its scintillating crystals. In…
We describe the generation and properties of a cryogenic beam of $^7$Li$_2$ dimers from sublimation of a neon matrix where lithium atoms have been implanted via laser ablation of solid precursors of metallic lithium or lithium hydride…
We have developped a novel lift-off process for fabrication of high quality superconducting submicron niobium structures. The process makes use of a thermostable polymer with a high transition temperature T_{g}= 235 C and an excellent…
This paper presents the design and benchmarking of cryogenic bulk-FETs using an experimentally calibrated TCAD framework that integrates 2-D electrostatics and interface-trap effects from $T = 2$ K to 300 K. For a 28-nm node device, carrier…
A superconducting RF accelerator test facility is currently under construction at Fermilab. The accelerator will consist of an electron gun, 40 MeV injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, and…
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of…