Related papers: Maximum strength and dislocation patterning in mul…
The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe…
Stacking Fault Energy (SFE) is an intrinsic alloy property that governs much of the plastic deformation mechanisms observed in fcc alloys. While SFE has been recognized for many years as a key intrinsic mechanical property, its inference…
Bicontinuous nanoporous materials possess remarkable mechanical properties, such as higher specific strength and lower specific modulus compared to fully dense materials combined with low densities and high specific surface areas.…
Magnesium (Mg) alloys have emerged as promising materials due to their low density and high strength-to-weight ratio, offering a wide range of applications across multiple industries. Nevertheless, the inherent brittleness of Mg alloys…
A theory of flow stress, including the yield strength is proposed for the class of PC materials with equilibrium defect structure (EDS), which is established in the PC material after series of $N_0$ similar treatments of severe plastic…
One usual way to strengthen a metal is to add alloying elements and to control the size and the density of the precipitates obtained. However, precipitation in multicomponent alloys can take complex pathways depending on the relative…
We use inelastic neutron scattering and molecular dynamics (MD) simulation to investigate the chemical short range order (CSRO), visible through prepeaks in the structure factors, and its relation to self diffusion in Al-Ni melts. As a…
Self-organized monolayers of highly flexible \Frechet dendrons were deposited on graphite surfaces by solution casting. Scanning tunneling microscopy (STM) reveals an unprecedented variety of patterns with up to seven stable hierarchical…
The burgeoning fields of spintronics and topological electronics require materials possessing a unique combination of properties: ferromagnetism, metallicity, and chemical stability. SrRuO3 (SRO) stands out as a compelling candidate due to…
Predicting the structural response of advanced multiphase alloys and understanding the underlying microscopic mechanisms that are responsible for it are two critically important roles modeling plays in alloy development. An alloys…
The slip behavior of dislocations and grain boundaries critically governs recrystallization and plastic deformation in Mg alloys and can be strongly influenced by solutes. However, the quantitative effects of solute distribution on defect…
Interfacial segregation and chemical short-range ordering influence the behavior of grain boundaries in complex concentrated alloys. In this study, we use atomistic modeling of a NbMoTaW refractory complex concentrated alloy to provide…
For (CoCrFeMn)$_{100-x}$Al$_{x}$ high-entropy alloys, we investigate the phase evolution with increasing Al-content (0 $\le$ x $\le$ 20 at.%). From first-principles theory, the Al-doping drives the alloy structurally from FCC to BCC…
The mechanical performance and microstructures of a CoCrNi medium-entropy alloy (MEA) and NCoCrNi, alloyed with 0.5at% N, after high pressure torsion (HPT) and subsequent annealing treatments in a temperature range of 150-1000 {\deg}C were…
Cooperative growth of the structure units (SUs) in a 14H type long-period stacking ordered (LPSO) structure has been observed, and there is no obvious accumulation of transformation strain at the growth fronts. The atomic structures at this…
The authors have shown in previous contributions that reduced order modeling with optimal cubature applied to finite element square (FE2) techniques results in a reliable and affordable multiscale approach, the HPR-FE2 technique. Such…
We present a thorough theoretical study of ordering phenomena in nitride ternary alloys GaInN, AlInN, and AlGaN. Using the Monte Carlo approach and energetics based on the Keating model we analyze the influence of various factors on…
Development of process-structure-property relationships in materials science is an important and challenging frontier which promises improved materials and reduced time and cost in production. Refractory high entropy alloys (RHEAs) are a…
Dislocation patterning and self-organization during plastic deformation are associated with work hardening, but the exact mechanisms remain elusive. This is partly because studies of the structure and local strain during the initial stages…
The yield strength plateau of two BCC refractory high entropy alloys (RHEAs) - MoNbTaVW and MoNbTaW was examined through hybrid Monte Carlo and molecular dynamics (MC/MD) simulations. By analyzing atomic diffusivities derived from vacancy…