Related papers: Simplified feedback control system for Scanning Tu…
A multiple-tip ultra-high vacuum (UHV) scanning tunneling microscope (MT-STM) with a scanning electron microscope (SEM) for imaging and molecular-beam epitaxy growth capabilities has been developed. This instrument (nanoworkbench) is used…
Conventional scanning tunneling microscopy (STM) is limited to a bandwidth of circa 1kHz around DC. Here, we develop, build and test a novel amplifier circuit capable of measuring the tunneling current in the MHz regime while simultaneously…
We report the design and performance of a cryogen-free, pulse-tube refrigerator (PTR)-based scanning probe microscopy (SPM) system capable of operating at the base temperature of near 5K. We achieve this by combining a home-made interface…
Scanning probe microscopy is one of the most versatile windows into the nanoworld, providing imaging access to a variety of sample properties, depending on the probe employed. Tunneling probes map electronic properties of samples, magnetic…
Many atomically thin exfoliated 2D materials degrade when exposed to ambient conditions. They can be protected and investigated by means of transport and optical measurements if they are encapsulated between chemically inert single layers…
A transimpedance amplifier has been designed for scanning tunneling microscopy (STM). The amplifier features low noise (limited by the Johnson noise of the 1 G{\Omega} feedback resistor at low input current and low frequencies), sufficient…
A scanning tunneling microscopy (STM) image of a hydrogen-adsorbed Si(001) surface is studied using first-principles electron-conduction calculation. The resultant STM image and scanning tunneling spectroscopy spectra are in agreement with…
Atomic scale characterization and manipulation with scanning probe microscopy rely upon the use of an atomically sharp probe. Here we present automated methods based on machine learning to automatically detect and recondition the quality of…
In the fields of nanoscience and nanotechnology, it is important to be able to functionalize surfaces chemically for a wide variety of applications. Scanning tunneling microscopes (STMs) are important instruments in this area used to…
We present a simple home made solution enabling in-situ RF reflectometry measurements with a millikelvin scanning tunneling microscope (mk-STM). The additions described below were made using RF best practices following similar detection…
A low-temperature ultra-high vacuum scanning probe microscopy (SPM) system with molecular beam epitaxy capability and optical access was conceived, built, and tested in our lab. The design of the whole system is discussed here, with special…
Simulations of scanning tunneling microscopy measurements for molecules on surfaces are traditionally based on a perturbative approach, most typically employing the Tersoff-Hamann method. This assumes that the STM tip is far from the sample…
The plasmonic tip of a scanning tunnelling microscope (STM) is functionalized with a single fluorescent molecule and is scanned on a plasmonic substrate. The tunneling current flowing through the tip-molecule-substrate junction generates a…
Investigation of transport properties is fundamental for characterizing electronic properties and phase transitions. However, most of the transport measurements on conductive layers have been performed at macroscopic scales, and thus the…
We present a fast and efficient tight-binding (TB) method for simulating scanning tunneling microscopy (STM) imaging of adsorbate molecules on ultrathin insulating films. Due to the electronic decoupling of the molecule from the metal…
Machine learning (ML) methods are extraordinarily successful at denoising photographic images. The application of such denoising methods to scientific images is, however, often complicated by the difficulty in experimentally obtaining a…
Nitride-based superconductors represent a family of superconducting thin film materials displaying higher quality than their corresponding bare superconductor when used in devices for applications such as cosmic radiation sensing. In recent…
Scanning probe microscopy (SPM) images of regularly arranged spatially periodic objects can be processed crystallographically. The resulting information may be used to remove from the SPM image distortions that are due to a less than…
The properties of nanoscopic superconducting structures fabricated with a scanning tunnelling microscope are reviewed, with emphasis on the effects of high magnetic fields. These systems include the smallest superconducting junctions which…
Electron-spin resonance carried out with scanning tunneling microscopes (ESR-STM) is a recently developed experimental technique that is attracting enormous interest on account of its potential to carry out single-spin on-surface resonance…