Related papers: Multi-modal electron microscopy study on decoheren…
The mechanical properties and deformation mechanisms of Cu/Nb nanoscale metallic multilayers (NMMs) manufactured by accumulative roll bonding (ARB) are studied at 25C and 400C. Cu/Nb NMMs with individual layer thicknesses between 7 and 63…
Semiconductor-superconductor hybrid materials are used as a platform to realise Andreev bound states, which hold great promise for quantum applications. These states require transparent interfaces between the semiconductor and…
Originally developed technique based on generation of plasma-cluster flux emitted from cathode spots at surface of an integrally cold cathode has been applied for deposition of niobium superconductive (thick) film materials. Possibility for…
We present measurements and simulations of superconducting Nb co-planar waveguide resonators on sapphire substrate down to millikelvin temperature range with different readout powers. In the high temperature regime, we demonstrate that the…
A detailed study of the near-surface structure and composition of Nb, the material of choice for Superconducting Radio Frequency accelerator (SRF) cavities, is of great importance in order to understand the effects of different treatments…
We report on a combined structural and electronic analysis of niobium ultrathin films (from 2 to 10 nm) deposited in ultra-high vacuum on atomically flat R-plane sapphire wafers. A textured polycrystalline morphology is observed for the…
We report a milestone in achieving large-scale, ultrathin (~5 nm) superconducting NbN thin films on 300 mm Si wafers using a high-volume manufacturing (HVM) industrial physical vapor deposition (PVD) system. The NbN thin films possess…
We developed a calorimeter with a vacuum container made of superconducting niobium (Nb) to study monolayers of helium adsorbed on graphite which are prototypical two-dimensional quantum matters below 1 K. Nb was chosen because of its small…
The exploration of the superconductivity in two-dimensional materials has garnered significant attention due to their promising low-power applications and fundamental scientific interest. Here, we report some novel stable non-van der Waals…
We perform electric double-layer gating experiments on thin films of niobium nitride. Thanks to a cross-linked polymer electrolyte system of improved efficiency, we induce surface charge densities as high as $\approx 2.8 \times…
Since the late '80s, CERN has pioneered the development of niobium thin film radio-frequency (RF) cavities deposited on copper substrates for several particle accelerator applications. However, niobium thin film cavities historically…
Quantum coherence in superconducting circuits has increased steadily over the last decades as a result of a growing understanding of the various loss mechanisms. Recently, tantalum (Ta) emerged as a promising material to address microscopic…
We report a study on the growth of NiBi3 nanowires and nanorods during the preparation of superconducting NiBi3 films by co-evaporation of Ni and Bi. We find that NiBi3 films grown via co-evaporation of Ni and Bi metals achieve higher…
Recently, Nb superconducting radio frequency cavities vacuum heat treated between 300-400 C for a few hours have exhibited very high quality factors (~5x10^10 at 2.0 K). New secondary ion mass spectrometry measurements of O, N and C show…
Superconducting niobium serves as a key enabling material for superconducting radio frequency (SRF) technology as well as quantum computing devices. At room temperature, hydrogen commonly occupies tetragonal sites in the Nb lattice as metal…
Flexible NbC nanocomposite thin films with carbon content ranging from 0 to 99 at.% were deposited at room temperature on Si (100) and polystyrene substrates by non-reactive magnetron sputtering from pure Nb and C targets without applying…
Tantalum thin films sputtered on unheated silicon substrates are characterized with microwaves at around 10 GHz in a 10 mK environment. We show that the phase of tantalum with a body-centered cubic lattice ($\alpha$-Ta) can be grown…
Superconductivity in granular films is controlled by the grain size and the inter-grain coupling. In a two-component granular system formed by a random mixture of a normal metal (N) and a superconductor (S), the superconducting nano-grains…
The origin of ferromagnetism in nanoparticles of nonmagnetic oxides is an interesting area of research. In the present work, transport properties of niobium thin films, with beta-Ga2O3 nanoparticles embedded within them, are presented.…
Hybrid Superconductor-Semiconductor (S-Sm) materials systems are promising candidates for quantum computing applications. Their integration into superconducting electronics has enabled on-demand voltage tunability at millikelvin…