Related papers: Laser-Induced Graphitisation of Diamond Under 30 f…
Three dimensional waveguides within the bulk of diamond are manufactured using ultrafast laser fabrication. High intensities within the focal volume of the laser cause breakdown of the diamond into a graphitic phase leading to a stress…
We investigate photoinization, energy deposition, plasma formation and the ultrafast optical breakdown in crystalline silicon irradiated by intense near-infrared laser pulses with pulse duration $\tau \le $ 100 fs. The occurrence of…
We report on the structural modifications induced by a lambda = 532 nm ns-pulsed high-power laser on sub-superficial graphitic layers in single-crystal diamond realized by means of MeV ion implantation. A systematic characterization of the…
A 30-fs, 800 nm, 1 kHz femtosecond was used to photoablate diamond across radiant energy doses of 1 - 500 kJ/cm^2, with fluences of 10 - 50 J/cm^2 and, pulse counts from 100 to 10,000. The objective was to maximise material removal while…
Ultrafast laser micromachining can be used to promote diamond graphitisation, enabling the creation of electrically conductive wires embedded in the diamond matrix. In this context, the presence of a potential barrier in the conductivity of…
We present the results of an experiment where amorphous carbon was irradiated by femtosecond x-ray free electron laser pulses. The 830 eV laser pulses induce a phase transition in the material which is characterized ex-situ. The phase…
Intense femtosecond x-ray pulses produced by an x-ray free-electron laser can trigger irreversible structural transitions in crystalline solids. For instance, irradiation of diamond can lead to graphitization and, at higher deposited doses,…
We unveil the diamondization mechanism of few-layer graphene compressed in the presence of water, providing robust evidence for the pressure-induced formation of 2D diamond. High-pressure Raman spectroscopy provides evidence of a phase…
In pursuit of diamond nanoparticles, a capacitively-coupled radio frequency (CCRF) flow-through plasma reactor was operated with methane argon gas mixtures. Signatures of the final product obtained microscopically and spectroscopically…
Soft x-rays were applied to induce graphitization of diamond through a non-thermal solid-to-solid phase transition. This process was observed within poly-crystalline diamond with a time-resolved experiment using ultrashort soft x-ray pulses…
In the recent years graphitization of ion-beam induced amorphous layers became the basic tool for device fabrication in diamond. The etchable graphitic layers can be removed to form free-standing membranes into which the desired structures…
A first demonstration and complete characterization of mid-infrared waveguides in diamond are reported in detail. Waveguides were designed for 2.4 um and 8.6 um waveguiding, with their group velocity dispersion was analyzed using…
We use ultrafast electron crystallography to study structural changes induced in graphite by a femtosecond laser pulse. At moderate fluences of ~< 21mJ/cm^2, lattice vibrations are observed to thermalize on a time scale of ~8ps. At higher…
Hot-filament process was recently employed to convert, totally or partially, few-layer graphene (FLG) with Bernal stacking into crystalline sp$^3$-C sheets at low pressure. Those materials constitute new synthetic carbon nanoforms. The…
The employment of ultrashort laser sources at the mid-IR spectral region for transparent materials is designed to open new routes for laser patterning and a wealth of exciting applications in optics and photonics. To elucidate the material…
An all-diamond photonic circuit was implemented by integrating a diamond microsphere with a femtosecond-laser-written bulk diamond waveguide. The near surface waveguide was fabricated by exploiting the Type II fabrication method to achieve…
Diamond displays a large variety of luminescence centers which define its optical properties and can be either created or modified by irradiation. The main purpose of the present work is to study the radiation hardness of several of such…
Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core.…
In this work, we demonstrate that cutting diamond crystals with a laser (532~nm wavelength, 0.5~mJ energy, 200~ns pulse duration at 15~kHz) produces a $\lesssim 20~$nm thick surface layer with magnetic order at room temperature. We have…
Stable 30 fs pulses centered at 1068 nm (less than 10 optical cycles) are demonstrated in a diode pumped Yb:CaYAlO4 laser by using high-quality chemical vapor deposited monolayer graphene as the saturable absorber. The mode locked 8.43…