Related papers: Improving the operational stability of thermoelect…
A single crystal of lead-zirconate-titanate (PZT), composition Pb(Zr0.80Ti0.20)O3, was studied by polarized-Raman scattering as a function of temperature. Raman spectra reveal that the local structure deviates from the average structure in…
The intermetallic compound ZnSb is an interesting thermoelectric material, largely due to its low lattice thermal conductivity. The origin of the low thermal conductivity has so far been speculative. Using multi-temperature single crystal…
The structural stability of thermoelectric materials is a subject of growing importance for their energy harvesting applications. Here, we study the microscopic mechanisms governing the structural stability change of zinc antimony at its…
Zinc antimony stands out among thermoelectrics because of its very low lattice thermal conductivity, close to the amorphous limit. Understanding the physical reason behind such an unusual crystal property is of fundamental interest for the…
We investigated the electrical conductivity, thermal conductivity and thermopower as a function of Nb content (x) in Ba0.7Eu0.3Ti1-xNbxO3 (x = 0.001- 0.10) in the temperature range T = 400-2 K. The substitution of Nb destabilizes the…
We report a solution-processed, ligand supported synthesis of 15-20 nm thick Sb(2-x)Bi(x)Te3 nanoplatelets. After complete ligand removal by a facile NH3-based etching procedure, the platelets are spark plasma sintered to a p-type…
Zn4Sb3 is shown to be entropically stabilized versus decomposition to Zn and ZnSb though the effects of configurational disorder and phonon free energy. Single phase stability is predicted for a range of compositions and temperatures.…
Pb(Zn$_{1/3}$Nb$_{2/3}$)O$_{3}$ is one of the simplest representatives of the lead ferroelectric relaxors. Its solid solution with PbTiO$_{3}$, at concentrations near the morphotropic phase boundary, is especially important. In this paper,…
Thermoelectric energy conversion - the exploitation of the Seebeck effect to convert waste heat into electricity - has attracted an increasing amount of research attention for energy harvesting technology. Niobium-doped strontium titanate…
Structural properties, impedance, dielectric and electric modulus spectra have been used to investigate the sintering temperature (Ts) effect on the single phase cubic spinel Ni0.6Zn0.4Fe2O4 (NZFO) ceramics synthesized by standard ceramic…
We have investigated the effect of Sb-deficiency on the thermoelectric figure of merit (zT) of Zn4Sb3 prepared by solid state reaction route. At high temperatures, the Seebeck coefficient (S) and electrical conductivity ({\sigma}) increase…
We report first principles LDA calculations of the electronic structure and thermoelectric properties of $\beta $-Zn$_{4}$Sb$_{3}$. The material is found to be a low carrier density metal with a complex Fermi surface topology and…
Thermoelectric materials create an electric potential when subject to a temperature gradient and vice versa hence they can be used to harvest waste heat into electricity and in thermal management applications. However, finding highly…
We report first principles calculations of the structural, electronic, elastic and vibrational properties of the semiconducting orthorhombic ZnSb compound. We study also the intrinsic point defects in order to eventually improve the…
The structure and the dielectric properties of Pb(Zn1/3Nb2/3)O3 (PZN) crystal have been investigated by means of high-resolution synchrotron x-ray diffraction (with an x-ray energy of 32 keV) and dielectric spectroscopy (in the frequency…
Half-Heusler (HH) compounds have shown high Figure of merits up to 1.5. The key to these high thermoelectric efficiencies is an intrinsic phase separation, which occurs in multicomponent Half-Heusler compounds and leads to an significantly…
By using the semi-wet synthesis method, lead-free ferroelectric materials Ba0.9Sr0.1Ti1-xSnxO3 with x = 0, 0.02, 0.05, and 0.10 (abbreviated as BSTS) were prepared and their structural, electric and electrocaloric properties were…
Whether porosity can effectively improve thermoelectric performance is still an open question. Herein we report that thermoelectric performance can be significantly enhanced by creating porosity in n-type Mg3.225Mn0.025Sb1.5Bi0.49Te0.01,…
Sb-doped Bi2Te3 is known since the 1950s as the best thermoelectric material for near-room temperature operation. Improvements in material performance are expected from nanostructuring procedures. We present a straightforward and fast…
Developing enzymes with desired thermal properties is crucial for a wide range of industrial and research applications, and determining temperature stability is an essential step in this process. Experimental determination of thermal…