Related papers: Short-Packet Interleaver against Impulse Interfere…
Increasing demands on high data rate mobile communications services will inevitably drive future broadband mobile communication systems toward achieving data transmission rates in excess of 100 Mbps. One of the promising technologies which…
The aim of this paper is to enhance the quality of Orthogonal Frequency Division Multiplexing OFDM estimation in dedicated vehicular communication transmission V2X networks. Wireless Access in Vehicular Environment WAVE as also known IEEE…
In the context of communication-centric integrated sensing and communication (ISAC), the orthogonal frequency division multiplexing (OFDM) waveform was proven to be optimal in minimizing ranging sidelobes when random signaling is used. A…
Ambient backscatter communication (AmBC) over orthogonal-frequency-division-multiplexing (OFDM) signals has recently been proposed as an appealing technique for low power Internet-of-Things (IoT) applications. The special spectrum structure…
In this work we investigate the network MIMO techniques of interference alignment (IA) and fully adaptive joint transmission coordinated multipoint (CoMP) in an indoor very small cell environment. Our focus is on the overheads in a system…
A telecommunication system uses carriers in order to transmit information through a cable or wirelessly. If each time only one carrier is transmitted, then the system s signal will not be immune to frequency selective fading. If frequency…
Wireless low-power transceivers used in sensor networks such as IEEE 802.15.4 typically operate in unlicensed frequency bands that are subject to external interference from devices transmitting at much higher power. Communication protocols…
Bit-interleaved coded modulation (BICM) has attracted considerable attention from the research community in the past three decades, because it can achieve desirable error performance with relatively low implementation complexity for a large…
In multi-user wireless packet networks interference, typically modeled as packet collision, is the throughput bottleneck. Users become aware of the interference pattern via feedback and use this information for contention resolution and for…
This work focuses on the performance of multi-terminal wireless industrial networks, where the transmissions of all terminals are required to be scheduled within a tight deadline. The transmissions thus share a fixed amount of resources,…
Wireless short-packet communications pose challenges to the security and reliability of the transmission. Besides, the proactive warder compounds these challenges, who detects and interferes with the potential transmission. An extra jamming…
In URLLC the performance of short message communications highly depends on the training sequence length due to the stringent latency and reliability requirements. In this paper, we study the performance of cooperative and non-cooperative…
Orthogonal Frequency Division Multiplexing (OFDM) has recently been used widely in wireless communication systems. OFDM is very effective in combating intersymbol interference and can achieve high data rate in frequency selective channel.…
This paper suggests achieving diversity gains while utilizing low-denisty parity check (LDPC) codes in molecular communications. Intersymbol interference (ISI) causes a significant disadvantage in error performance for molecular…
In this work, we discuss techniques for coherently detecting turbo coded orthogonal frequency division multiplexed (OFDM) signals, transmitted through frequency selective Rayleigh (the magnitude of each channel tap is Rayleigh distributed)…
The variation in the prescribed modulation schemes and code rates for WiMAX interleaver design, as defined by IEEE 802.16 standard, demands a plethora of hardware if all the modulation schemes and code rates have to be unified into a single…
This paper studies a two-hop decode-and-forward underlay cognitive radio system with interference alignment technique. An energy-constrained relay node harvests the energy from the interference signals through a power-splitting (PS)…
It is well known that asynchronous impulsive noise is the main source of distortion that drastically affects the power-line communications (PLC) performance. Recently, more realistic models have been proposed in the literature which better…
To meet the Ultra Reliable Low Latency Communication (URLLC) needs of modern applications, there have been significant advances in the development of short error correction codes and corresponding soft detection decoders. A substantial…
Machine-type communication requires rethinking of the structure of short packets due to the coding limitations and the significant role of the control information. In ultra-reliable low-latency communication (URLLC), it is crucial to…