Related papers: Surface acoustic waves inside polystyrene micropar…
Atomic force microscopy is an important tool for characterizing surface acoustic waves, in particular for high frequencies, where the wavelength is too short to be resolved by laser interferometry. A caveat is, that the cantilever…
Surface Acoustic Wave (SAW) resonances were imaged within a closed domain in the ferroelectric LiTaO$_3$ via scanning Microwave Impedance Microscopy (MIM). The MIM probe is used for both SAW generation and measurement, allowing contact-less…
Surface acoustic wave (SAW) devices form an important class of acoustofluidic devices, in which the acoustic waves are generated and propagate along the surface of a piezoelectric substrate. Despite their wide-spread use, only a few fully…
Light pressure effect has been discovered long ago and has been used as an optical method to manipulate microand nanoparticles. It is usually considered as a nonresonant effect determined by the transfer of the momentum of light. However,…
Acoustic tweezers comprising a surface acoustic wave chip and a disposable silicon microfluidic chip are potentially advantageous to stable and cost-ffective acoustofluidic experiments while avoiding the cross-contamination by reusing the…
We study the interaction of surface acoustic waves (SAWs) with the contact-based, axial vibrational resonance of 1 \mu m silica microspheres forming a two-dimensional granular crystal adhered to a substrate. The laser-induced transient…
We investigate laser-induced acoustic wave propagation through smooth and roughened titanium-coated glass substrates. Acoustic waves are generated in a controlled manner via the laser spallation technique. Surface displacements are measured…
An all-optical detection method for the detection of acoustic pressure waves is demonstrated. The detection system is based on a stripped (bare) single-mode fiber. The fiber vibrates as a standard cantilever and the optical output from the…
The role of metallic nanostructures in nanophotonics is expected to expand if ways to electrically manipulate their optical resonances at high speed can be identified. Here, we capitalize on electrically-driven surface acoustic waves and…
There are a few methodologies to monitoring the Porous Silicon (PS) formation in-situ. One of these methodologies is photoacoustic. Previous works that reported the use of photoacoustic to study the PS formation do not provide the physical…
Aims. In this paper we analyse numerically the propagation and dispersion of acoustic waves in the solar-like sub-photosphere with localised non-uniform magnetic field concentrations, mimicking sunspots with various representative magnetic…
Coherent gigahertz-frequency surface acoustic waves (SAWs) traveling on the surface of a piezoelectric crystal can, via the magnetoelastic interaction, resonantly excite traveling spin waves in an adjacent thin-film ferromagnet. These…
Surface acoustic waves in two-dimensional phononic crystals consisting of a square array of shallow, two to three micron deep cylindrical void inclusions are studied computationally via the finite element method. For the [110] propagation…
Photoacoustic spectral analysis is a novel tool for studying various parameters affecting signals in Photoacoustic microscopy. But only observing frequency components of photoacoustic signals doesn't make enough data for a desirable…
There is a great desire to extend ultrasonic techniques to the imaging and characterization of nanoobjects. This can be achieved by picosecond ultrasonics, where by using ultrafast lasers it is possible to generate and detect acoustic waves…
This paper presents a microfluidic device that implements standing surface acoustic waves in order to handle single cells, droplets, and generally particles. The particles are moved in a very controlled manner by the two-dimensional…
Acoustic detection has many applications across science and technology, from medical to imaging and communications. However, most acoustic sensors have a common limitation in that the detection must be near the acoustic source.…
Airborne 3D imaging using ultrasound is a promising sensing modality for robotic applications in harsh environments. Over the last decade, several high-performance systems have been proposed in the literature. Most of these sensors use a…
The flow profile in a capillary gap and the pumping efficiency of an acoustic micropump employing Surface Acoustic Waves is investigated both experimentally and theoretically. Such ultrasonic surface waves on a piezoelectric substrate…
Brillouin scattering in optical fibres is a fundamental interaction between light and sound with important implications ranging from optical sensors to slow and fast light. In usual optical fibres, light both excites and feels shear and…