Related papers: Assessment of Mudrock Brittleness with Micro-scrat…
We study the statistical features of magnetic noise accompanying the dynamic fracture of steel samples during mixed type fracture, where the overall ductile character of crack propagation is interrupted by a sudden brittle jump. The…
We use large-scale simulations to investigate the dynamic fracture of silica and sodium-silicate glasses under uniaxial tension. The stress-strain curves demonstrate that silica glass is brittle whereas the glasses rich in Na show…
In the assessment of wood charring, it was believed for a long time that physicochemical processes were responsible for the creation of cracking patterns on the charring wood surface. This implied no possibility to rigorously explain the…
Shell buckling is central in many biological structures and advanced functional materials, even if, traditionally, this elastic instability has been regarded as a catastrophic phenomenon to be avoided for engineering structures. Either way,…
A conception of inhomogeneous locally random distribution of microdefects in crystalline solids is proposed. A method to calculate some physical properties of solids, containing inhomogeneously distributed defects, is developed. A…
Over the past seven years, full-field analyses of a wide range of classical as well as modern quasi-static fracture experiments on nominally elastic brittle materials -- ranging from hard ceramics to soft elastomers -- have repeatedly…
Fractures are ubiquitous in the subsurface. The flow and mechanical properties of these fractures are controlled by its compliance or stiffness. Characterizing fracture compliance and conductivity is crucial in applications such as fault…
Liquid wetting of a surface is omnipresent in nature and the advance of micro-fabrication and assembly techniques in recent years offers increasing ability to control this phenomenon. Here, we identify how surface roughness influences the…
Ultrasound has long been used as a non-destructive tool to test for the brittle fracture of materials. Could it be used as a similar tool to test for ductile failure? This study reports results of local measurements of the speed of shear…
Structural stiffness plays an important role in engineering design. The analysis of stiffness requires precise experiments and computational models that can be difficult or time-consuming to procure. A novel relation between modal and…
Theoretical analyses and experiments have been carried out to investigate fracture behavior of glassy polymers. Our birefringence measurements quantify the local stress buildup at cut tip during different stages of drawing. Based on…
In studies of the dynamic failure of brittle hydrogels, a bound has been placed on the process zone scale - the scale where material separation and ultimate failure occur. For the polyacrylamide hydrogel system under study, this bound is…
This paper presents a modeling framework to describe the driving mechanisms of cyclic failure in brittle and ductile materials, including cyclic plasticity and fatigue crack growth. A variational model is devised using the energetic…
Properties of typical MEMS materials have been widely investigated. Mechanical properties of MEMS structures depend not only on the bulk material properties, but also structural factors. A measurement system has been made to measure…
A field theory is presented for predicting damage and fracture in quasi-brittle materials. The approach taken here is new and blends a non-local constitutive law with a two-point phase field. In this formulation, the material displacement…
The method of iterated conformal maps is developed for quasi-static fracture of brittle materials, for all modes of fracture. Previous theory, that was relevant for mode III only, is extended here to mode I and II. The latter require…
Most monolithic brittle materials are vulnerable to the failure by cracks because of a lack of intrinsic toughening mechanisms, such as the plasticity in the vicinity of the crack front. As a result, most of the efforts to mitigate the…
Entangled matter provides intriguing perspectives in terms of deformation mechanisms, mechanical properties, assembly and disassembly. However, collective entanglement mechanisms are complex, occur over multiple length scales, and they are…
Fracturing in reservoir rocks is an important issue for the petroleum industry - as productivity can be enhanced by a controlled fracturing operation. Fracturing also has a big impact on CO2 storage, geothermal installation and gas…
The mechanical behaviour of many materials, including polymers or natural materials, significantly depends on the rate of deformation. As a consequence, a rate-dependent ductile-to-brittle fracture transition may be observed. For…