Related papers: Assessment of Mudrock Brittleness with Micro-scrat…
The deformation of rocks is associated with microcracks nucleation and propagation, i.e. damage. The accumulation of damage and its spatial localization lead to the creation of a macroscale discontinuity, so-called "fault" in geological…
Knowledge of the seismological signature of serpentinites during deformation is fundamental for interpreting seismic observations in subduction zones, but this has yet to be experimentally constrained. We measured compressional and shear…
Bio-chemical reactions enable the production of biomimetic materials such as sandstones. In the present study, microbiologically-induced calcium carbonate precipitation (MICP) is used to manufacture laboratory-scale specimens for fracture…
Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for…
The scope of this study is to understand the strength behaviour and fragment size of rocks during indirect, quasi-static, and dynamic tensile tests. Four rocks with different lithological characteristics namely, basalt, granite, sandstone…
We study the dynamics of cracks in brittle materials when the velocity of the crack is comparable to the sound velocity by means of lattice simulations. Inertial and damped dynamics are analyzed. It is shown that dissipation strongly…
Creep deformation in shale rocks is an important factor in many applications, such as the sustainability of geostructures, wellbore stability, evaluation of land subsidence, CO2 storage, toxic waste containment, and hydraulic fracturing.…
Under compressive stress, rock ``damage'' in the form of tensile microcracks is coupled to internal slip on microscopic interfaces, such as preexisting cracks and grain boundaries. In order to characterise the contribution of slip to the…
Brittle materials exhibit sharp dynamical fractures when meeting Griffith's criterion, whereas ductile materials blunt a sharp crack by plastic responses. Upon continuous pulling ductile materials exhibit a necking instability which is…
In this paper, the effect of local defects, viz., cracks and cutouts on the buckling behaviour of functionally graded material plates subjected to mechanical and thermal load is numerically studied. The internal discontinuities, viz.,…
This study investigated, experimentally and numerically, the fracturing behavior of thermoset polymer structures featuring cracks and sharp u-notches. It is shown that, even for cases in which the sharpness of the notch would suggest…
In chemically reactive environments, the mechanical integrity of geomaterials is fundamentally compromised by solid matrix dissolution. In this study, we propose a fully coupled chemo-mechanical phase-field framework to capture the dynamic…
The rock heterogeneity exists widely in fault zones; however, the intrinsic mechanism of how it affects the mechanical behavior of faults is poorly understood. To develop a quantitative understanding of the effect of the rock heterogeneity…
The dynamics of a crack propagating in an elastic inhomogeneous material is investigated. The variations of the average crack velocity with the external loading are measured for a brittle rock and are shown to display two distinct regimes:…
This study examines the feasibility of the full-field ultrasonic characterization of fractures in rock. To this end, a slab-like specimen of granite is subjected to in-plane, O(10$^4$Hz) excitation while monitoring the induced 2D wavefield…
We measure the drag encountered by a vertically oriented rod moving across a sedimented granular bed immersed in a fluid under steady-state conditions. At low rod speeds, the presence of the fluid leads to a lower drag because of buoyancy,…
Characterizing the elastic properties of soft materials through bulge testing relies on accurate measurement of deformation, which is experimentally challenging. To avoid measuring deformation, we propose a hydrodynamic bulge test for…
Fractures are a critical process in how materials wear, weaken, and fail whose unpredictable behavior can have dire consequences. While the behavior of smooth cracks in ideal materials is well understood, it is assumed that for real,…
Differential shrinkage in particulate quasi-brittle materials causes microcracking which reduces durability in these materials by increasing their mass transport properties. A hydro-mechanical three-dimensional periodic network approach was…
Refractory body-centered cubic (BCC) metals and alloys are of extraordinary importance in modern technological and structural applications. However, their wider adoption in science and technology is severely restricted by low-temperature…