Related papers: A high-resolution, low-latency, bunch-by-bunch fee…
In this article, global stabilization results for the Benjamin-Bona-Mahony-Burgers' (BBM-B) type equations are obtained using nonlinear Neumann boundary feedback control laws. Based on the $C^0$-conforming finite element method, global…
In order to achieve its ambitious luminosity target, the SuperKEKB collider must achieve and sustain high beam currents on the order of Ampere in its storage rings. This requires continuous top-up injection and operation with a two-bunch…
A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) damping ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a…
Modern fourth-generation storage ring light sources predominantly utilize digital I/Q-based proportional-integral (PI) feedback for their radio-frequency (RF) systems. This paper introduces a dedicated PI feedback model implemented in the…
In this paper, some preliminary considerations on the feedback systems for FCC-ee are developed. Bunch-by-bunch feedback systems have been designed in the last years for other e+/e- colliders like PEP-II, KEKB, DAFNE, SuperB and SuperKEKB.…
Time-bin encoded photon pairs enable robust, decoherence-resistant transmission through optical fibers for long-distance quantum communication, where phase noise poses a critical limitation to stable operation. Here, we implement an…
A system for bunch-by-bunch detection of transverse proton and antiproton coherent oscillations in the Fermilab Tevatron collider is described. It is based on the signal from a single beam-position monitor located in a region of the ring…
We present a compact laser frequency stabilization method by locking a 556 nm laser to a high-precision wavelength meter. Unlike traditional schemes that rely on optical cavities or atomic references, we stabilize the laser frequency via a…
We review beam position monitors adopting the perspective of an analogue-to- digital converter in a sampling data acquisition system. From a statistical treatment of independent data samples we derive basic formulae of position uncertainty…
In this work, we develop and analyze adaptive feedback control strategies to stabilize and confine a nanoparticle at the unstable intensity minimum of an optical double-well potential. The resulting stochastic optimal control problem for a…
Beam-line equipment was upgraded for experiment E08-027 (g2p) in Hall A at Jefferson Lab. Two beam position monitors (BPMs) were necessary to measure the beam position and angle at the target. A new BPM receiver was designed and built to…
We present a detailed study of how phase-sensitive feedback schemes can be used to improve the performance of optomechanical devices. Considering the case of a cavity mode coupled to an oscillating mirror by the radiation pressure, we show…
Feedback loops are at the heart of most classical control procedures. A controller compares the signal measured by a sensor with the target value. It adjusts then an actuator in order to stabilize the signal towards its target. Generalizing…
In this paper, we consider the feedback stabilization problem for N-level quantum angular momentum systems undergoing continuous-time measurements. By using stochastic and geometric control tools, we provide sufficient conditions on the…
Unit-efficiency homodyne detection of the resonance fluorescence of a two-level atom collapses the quantum state of the atom to a stochastically moving point on the Bloch sphere. Recently,Hofmann, Mahler, and Hess [Phys. Rev. A {\bf 57},…
In this paper we introduce a finite-parameters feedback control algorithm for stabilizing solutions of the Navier-Stokes-Voigt equations, the strongly damped nonlinear wave equations and the nonlinear wave equation with nonlinear damping…
IP-BPM (Interaction Point Beam Position Monitor) is an ultra high resolution cavity BPM to be used at ATF2, a test facility for ILC final focus system. Control of beam position in 2 nm precision is required for ATF2. Beam tests at ATF…
The main focus of beam alignment is to find the optimal beam which yields the largest received signal strength (RSS) with faster speed.In this paper, we demonstrate an efficient beam alignment scheme with our testbed. The algorithm we…
The scanning electron microscope (SEM) recordings of dynamic nano-electromechanical systems (NEMS) are difficult to analyze due to the noise caused by low frame rate, insufficient resolution and blurriness induced by applied electric…
Magnetizable piezoelectric beams exhibit strong couplings between mechanical, electric, and magnetic fields, significantly affecting their high-frequency vibrational behavior. Ensuring exponential stability under boundary feedback…