Related papers: Extraordinary strain hardening from dislocation lo…

Understanding failure in nanomaterials is critical for the design of reliable structural materials and small-scale devices that have components or microstructural elements at the nanometer length scale. No consensus exists on the effect of…

The generalized stacking fault (SFE) energy curves of pure gold (Au) and its binary alloys with transition metals are determined from density functional theory (DFT). Alloy elements Ag, Al, Cu, Ni, Ti, Zr, Zn, In, Ga, Sn, Mn, Cd, Sn, Ta and…

The superconducting properties of a recently discovered high $T_{\rm c}$ superconductor, Sr/ammonia-intercalated FeSe, have been measured using pulsed magnetic fields down to $4.\,\rm {K}$ and muon spin spectroscopy down to $1.5\,\rm K$.…

The effect of Si on Fe-rich intermetallics formation and mechanical properties of heat-treated squeeze cast Al-5.0Cu-0.6Mn-0.7Fe alloy was investigated. Our results show that increasing Si content promotes the formation of…

This work proposes an investigation on the scaling of the structural strength of polymer/graphene nanocomposites. To this end, fracture tests on geometrically scaled Single Edge Notch Bending (SENB) specimens with varying contents of…

Superconducting properties of thin films can be vastly different from those of bulk materials. Seminal work has shown the critical temperature Tc of elemental superconductors decreases with decreasing film thickness when the normal-state…

Dislocation patterning and self-organization during plastic deformation are associated with work hardening, but the exact mechanisms remain elusive. This is partly because studies of the structure and local strain during the initial stages…

The microstructure and mechanical properties of materials saturate to steady states after severe plastic deformation (SPD). Despite the well-known effect of temperature on the steady-state microstructure, there is no general agreement on…

Thermomechanical processing such as annealing is one of the main methods to tailor the mechanical properties of materials, however, much is unknown about the reorganization of dislocation structures deep inside macroscopic crystals that…

A Cu-Fe nanocomposite containing 50 nm thick iron filaments dispersed in a copper matrix was processed by torsion under high pressure at various strain rates and temperatures. The resulting nanostructures were characterized by transmission…

Precipitation strengthening is one of the most effective methods to design alloys with the desired combination of strength and ductility. The main mechanism of strengthening is generally known to be the interaction between dislocations and…

Plastic flow in body-centered cubic (BCC) metals and dilute/concentrated alloys is governed by the motion of <111> screw dislocations, whose glide is often impeded by cross-kinks (jogs). While existing strengthening models typically treat…

A phase field model is presented to investigate dislocation formation (coherency loss) and workhardening in two-phase binary alloys. In our model the elastic energy density is a periodic function of the shear and tetragonal strains, which…

Aluminum scandium nitride (AlScN) ferroelectrics are promising for next-generation non-volatile memory applications due to high remnant polarization compared with Pb(ZrxTi1-x)O3 and doped-HfO2 material systems, as well as their fast…

The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $\theta'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out…

High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to…

Stacking fault energy (SFE) plays an important role in deformation mechanisms and mechanical properties of face-centered cubic (fcc) metals and alloys. In metastable fcc alloys, the SFEs determined from density functional theory (DFT)…

We develop a theoretical framework to investigate the interplay between quantum size effect (QSE) and strain effect on the stability of metal nanofilms. The QSE and strain effect are shown to be coupled through the concept of "quantum…

A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6\%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain…

We report an investigation of the structural and electronic properties of hybrid superconductor/ferromagnet (S/F) bilayers of composition Nb/Cu$_{60}$Ni$_{40}$ prepared by magnetron sputtering. X-ray and neutron reflectometry show that both…