Related papers: Strengthening $\kappa$-carbide steels using residu…
We reformulate the theory of polycrystalline plasticity, in externally driven, nonequilibrium situations, by writing equations of motion for the flow of energy and entropy associated with dislocations. Within this general framework, and…
The old creation method of this coating is using salt bath for an approximate time of 6 to 10 hours, which means wasting a lot of time and energy while the formation of this coating with the plasma electrolytic method just takes about 15…
A variety of severe plastic deformation (SPD) techniques have been developed to process materials to high strains and impart microstructural refinement. High pressure torsion (HPT) is one technique that imparts inhomogeneous strain to…
The classic Kob-Andersen (KA) binary Lennard-Jones mixtures which are designed to prevent crystallization has been extensively studied in simulation of slow dynamics. Although crystallization can occur if a liquid system is cooled slowly,…
We report the magnetic properties of mechanically milled Co$_{0.2}$Zn$_{0.8}$Fe$_2$O$_4$ spinel oxide. After 24 hours milling of the bulk sample, the XRD spectra show nanostructure with average particle size $\approx$ 20 nm. The as milled…
The low temperature heat capacity C_{p} of Fe_{1-x}Ga_{x} alloys with large magnetostriction has been investigated. The data were analyzed in the standard way using electron ($\gamma T$) and phonon ($\beta T^{3}$) contributions. The Debye…
The thermal stability of accretion disk and the possibility to see a limit-cycle behaviour strongly depends on the ability of the disk plasma to cool down. Various processes connected with radiation-matter interaction appearing in hot…
High- and medium-entropy nitride coatings from the Cr-Hf-Mo-Ta-W-N system were studied using ab initio calculations and experiments to clarify the role of entropy and individual elements in phase stability, microstructure, and…
Dual-phase $\gamma$-TiAl and $\alpha_2$-Ti$_{3}$Al alloys exhibit high strength and creep resistance at high temperatures. However, they suffer from low tensile ductility and fracture toughness at room temperature. Experimental studies show…
The use of REBCO coated conductors is envisaged for many applications, extending from power cables to high-field magnets. Whatever the case, thermal properties of REBCO tapes play a key role for the stability of superconducting devices. In…
Recent studies of FeMnCoCr-based high entropy alloys have demonstrated uncommon deformation behaviors such as transformation-induced plasticity, which were largely believed to be restricted to select families of steels. Coupled with the…
Improved trapped fields are reported for bulk melt-textured YBa2Cu3O7-x (YBCO) material in the temperature range between 20 K and 50 K. Trapped fields up to 12.2 T were obtained at 22 K on the surface of single YBCO disks (with Ag and Zn…
Results of torsional oscillation tests are reported that were performed at the temperature T=230C on melts of a hybrid nanocomposite consisting of isotactic polypropylene reinforced with 5 wt.% of montmorillonite clay. Prior to mechanical…
Phase transitions in metastable $\alpha$-, $\kappa(\epsilon)$-, and $\gamma$-Ga$_2$O$_3$ films to thermodynamically stable $\beta$-Ga$_2$O$_3$ during annealing in air, N$_2$, and vacuum have been systematically investigated via in-situ…
We investigate the basic thermal, mechanical and structural properties of body centred cubic iron ($\alpha$-Fe) at several temperatures and positive loading by means of Molecular Dynamics simulations in conjunction with the embedded-atom…
Based on state-of-the-art density-functional-theory methods we calculate the stacking-fault energy of the paramagnetic random Fe-22.5at.%Mn alloy between 300-800 K. We estimate magnetic thermal excitations by considering longitudinal…
Thin films of the superconductor YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO) were modified by low-energy light-ion irradiation employing collimated or focused He$^+$ beams, and the long-term stability of irradiation-induced defects was investigated.…
The doping dependence of dry thermal oxidation rates in n-type 4H-SiC was investigated. The oxidation was performed in the temperature range 1000C to 1200C for samples with nitrogen doping in the range of 6.5e15/cm3 to 9.3e18/cm3, showing a…
The effects of compocasting process parameters on some structural and tensile characteristics of the A356-10% SiCp (volume fraction) composites were studied. Semisolid stirring was carried out at temperatures of 590, 600 and 610 C with…
The mechanical response of Haynes 282, a wrought gamma prime strengthened nickel based superalloy, is tailored by using both a cold deformation processing and a post straining heat treatment including a two step aging. In this work, the…