Related papers: Strengthening $\kappa$-carbide steels using residu…
Effective post-heat treatment is critical to achieve desired microstructure for high-performance in additively manufactured (AM) components. In this work, the influence of homogenization on microstructure-property relationship in 17-4PH…
The thermal conductivities ($\kappa$) of bulk and thin-film $\alpha$-Al$_2$O$_3$ are calculated from first principles using both the local density approximation (LDA), and the generalized gradient approximation (GGA) to exchange and…
The effect of Si on Fe-rich intermetallics formation and mechanical properties of heat-treated squeeze cast Al-5.0Cu-0.6Mn-0.7Fe alloy was investigated. Our results show that increasing Si content promotes the formation of…
The thermal conductivity of optimally doped NaFe$_{0.972}$Co$_{0.028}$As ($T_c \sim$ 20 K) and overdoped NaFe$_{0.925}$Co$_{0.075}$As ($T_c \sim$ 11 K) single crystals were measured down to 50 mK. No residual linear term $\kappa_0/T$ is…
Energy efficiency is motivating the search for new high-temperature metals. Some new body-centered-cubic random multicomponent "high entropy alloys (HEAs)" based on refractory elements (Cr-Mo-Nb-Ta-V-W-Hf-Ti-Zr) possess exceptional…
Measurements of thermal conductivity (kappa) vs temperature are reported for a series of Ca_{1-x} La_x MnO_3(0 <= x <= 0.2) specimens. For the undoped (x=0), G-type antiferromagnetic compound a large enhancement of kappa below the Neel…
We investigated the influence of doping antiferromagnetic MnN in polycrystalline MnN/CoFe exchange bias systems, showing high exchange bias of up to 1800 Oe at room temperature. The thermal stability of those systems is limited by nitrogen…
In the framework of the suggested in [arxiv:1803.08247 [cond-mat.mtrl-sci]] statistical theory of the equilibrium flow stress, including yield strength, ${\sigma}_y$, of polycrystalline materials under quasi-static (in case of tensile…
When materials are deformed at extreme strain rates, greater than $10^6 \text{ s}^{-1}$, a counterintuitive mechanical response is seen where the strength and hardness of pure metals increases with increasing temperature. The anti-thermal…
The paper presents a new approach, based on controlled oxidation of nanoscale metallic multilayers, to produce strong and hard oxide/metal nanocomposite coatings with high strength and good thermal stability. The approach is demonstrated by…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr)…
Tube processing and aging effects in FeCrAl ODS steels are investigated in four mechanical alloyed ferritic ODS steels, Fe15Cr (SP2), Fe15Cr5Al (SP4), Fe15Cr7Al (SP7) and Fe18Cr7Al (SP11). These steels were made into 0.3mm thick plates by…
The thermal conductivity \kappa is measured in a series of La_{2-x}Sr_{x}CuO_{4} (x = 0 - 0.22) single crystals down to 90 mK to elucidate the evolution of the residual electronic thermal conductivity \kappa_{res}, which probes the extended…
A novel phenomenological framework for an efficient estimation of the thermo-electric properties at room temperature and elevated temperatures of body-centered cubic (BCC) transition metal concentrated alloys is proposed in this work. The…
The temperature dependence of mechanical properties of steel nanowires with varying carbon content was studied using molecular dynamics simulations. Four interatomic potentials were assessed, with the Modified Embedded Atom Method (MEAM)…
We conduct dislocation dynamics (DD) simulations of Fe periodic single crystals under tensile load at several high strain rates and temperatures. The simulations are enabled by the recent development of temperature-dependent dislocation…
The deformation behavior of single crystal and nanocrystalline nickel were studied using in situ micropillar compression experiments from quasi-static to high strain rates up to 10^3 s-1. Deformation occurred by dislocation slip activity in…
A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 {\deg}C, 975 {\deg}C and 1000 {\deg}C to reveal the influence of temperature and the resulting…
Thermodynamic systems that preserve information against thermal fluctuations face a tradeoff distinct from transmission (Shannon) or erasure (Landauer). We formalize the preservation problem by defining the preservation stiffness…
The strength of body-centered cubic materials is traditionally known to be governed by screw dislocations. However, recent findings reveal that in certain refractory complex concentrated alloys, edge dislocations can instead control…