English
Related papers

Related papers: LCLS-II-HE verification cryomodule high gradient p…

200 papers

The Tera Electronvolt Superconducting Linear Accelerator TESLA is the only linear electron-positron collider project based on superconductor technology for particle acceleration. In the first stage with 500 GeV center-of-mass energy an…

Cryogenic helium-4 has extremely small kinetic viscosity, which makes it a promising material for high Reynolds ($Re$) number turbulence research in compact laboratory apparatuses. In its superfluid phase (He II), helium has an…

Other Condensed Matter · Physics 2020-05-20 Hamid Sanavandi , Shiran Bao , Yang Zhang , Ruben Keijzer , Wei Guo , Lou N. Cattafesta

LCLS-II is currently in its commissioning phase at SLAC. It is an X-ray FEL driven by a CW superconducting LINAC. The beam injector plays a crucial role in the overall performance of the accelerator, and is critical to the final electron…

The design of the proposed linear collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities, operated in pulsed mode. Within the framework of an international collaboration the TESLA Test Facility (TTF) has been set up at…

Accelerator Physics · Physics 2007-05-23 M. Liepe

Experiments were performed at the Fermilab Accelerator Science and Technology (FAST) facility to elucidate the effects of long-range wakefields (LRWs) in TESLA-type superconducting rf cavities. In particular, we investigated the…

Accelerator Physics · Physics 2022-07-13 A. H. Lumpkin , R. Thurman-Keup , D. Edstrom , P. Prieto , J. Ruan , B. Jacobson , J. Sikora , J. Diaz-Cruz , A. Edelen , F. Zhou

The conceptional design of the proposed linear electron-positron collider TESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with an accelerating gradient of Eacc >= 25 MV/m at a quality factor Q0 > 5E+9. The design goal for…

Accelerator Physics · Physics 2009-11-06 B. Aune

Initial test results of an L-band multi-beam klystron with parameters relevant for ILC are presented. The chief distinction of this tube from MBKs already developed for ILC is its low operating voltage of 60 kV, a virtue that implies…

Nitrogen-doping and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different…

The increase over the last years of the testing activities related to quantum systems, SRF cavities for the PIP-II and the LCLS-II projects, as well as superconducting magnets for the HL-LHC project and Fusion research activities, has…

The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5-7.5$\times10^{34}$ cm$^{-2}$s$^{-1}$. This High Luminosity upgrade of the LHC (HL-LHC) will deliver a total of 3000-4000…

Instrumentation and Detectors · Physics 2023-03-08 The Tracker Group of the CMS Collaboration

Superconducting RF cavities are used in particle accelerators to provide energy to the particle beam. Such cavities are mostly fabricated in niobium and often operated in superfluid helium. One of their limits of operation is the appearance…

While the CMS experiment is currently harvesting LHC collision data at CERN, the performance of its electromagnetic calorimeter (ECAL) is being constantly monitored, and work has started to assess the need for changes to the detector to…

Instrumentation and Detectors · Physics 2019-08-13 Francesca Nessi Tedaldi

Superconducting ratio-frequency (SRF) cavities, cooled by superfluid helium-4 (He II), are key components in modern particle accelerators. Quenches in SRF cavities caused by Joule heating from local surface defects can severely limit the…

Accelerator Physics · Physics 2019-04-10 Shiran Bao , Wei Guo

The ATLAS detector is set to undergo a substantial upgrade termed the "Phase-II" upgrade during the Long-Shutdown in preparation for the start of operation of the High Luminosity Large Hadron Collider (HL-LHC). This paper describes the…

Instrumentation and Detectors · Physics 2022-07-27 E. Nkadimeng , R. Mckenzie , S. Moayedi , S. Nemecek , H. Hadavand , B. Mellado , R. van Rensburg

The design, construction, and commissioning of a conduction-cooled Nb3Sn demonstration superconducting radio frequency (SRF) electron accelerator at the Institute of Modern Physics of the Chinese Academy of Sciences (IMP, CAS) will be…

Hardware-firmware integration is becoming a productivity bottleneck due to the increasing complexity of accelerators, characterized by intricate memory hierarchies and firmware-intensive execution. While numerous verification techniques…

Hardware Architecture · Computer Science 2026-04-14 G Abarajithan , Zhenghua Ma , Francesco Restuccia , Ryan Kastner

SPIRAL2 is a superconducting accelerator for protons, deuterons and heavy ions delivering a maximum beam power of 200 kW at 40 MeV (for deuteron beams). 26 superconducting quarter wave cavities are operated at 4.4 K, plunged in a liquid…

The CW RF test of 1.3 GHz 9-cell cavity in liquid helium bath at 2 K is a very important key point in the cavity procurement. Some problems can be found through the test, according which to optimized and improve the process of cavity.…

Large-scale superconducting quantum computers require massive numbers of high-performance cryogenic low-noise amplifiers (cryo-LNA) for qubit readout. Here we present a C-Band monolithic microwave integrated circuit (MMIC) cryo-LNA for this…

The CMS muon system operates gas-based detectors. Upgrades of the detectors and trigger components are needed to cope with increasingly challenging conditions of the HL-LHC. New irradiation tests are performed to ensure that the muon…

Instrumentation and Detectors · Physics 2018-09-07 Jian Wang