Related papers: Morphology of multiple constant height hydraulic f…
During hydraulic fracturing, the injection of a pressurized fluid in a brittle elastic medium leads to the formation and growth of fluid-filled fractures. A disc-like or penny-shaped fracture grows radially from a point source during the…
These notes address the mechanics of propagating hydraulic fractures (HF). In the first part, we focus on how different physical mechanisms (dissipation in fluid and solid, fluid storage in fracture and its exchange with permeable rock,…
We detail the energy balance of a propagating hydraulic fracture. Using the linear hydraulic fracture model which combines lubrication flow and linear elastic fracture mechanics, we demonstrate how different propagation regimes are related…
Understanding the behavior of fluid-driven hydraulic fracture in naturally fractured reservoirs is crucial in the development of geothermal energy and unconventional reservoirs. This study presents a fully-coupled numerical model to…
It is usually assumed that hydraulic fracture has two symmetrical wings with respect to the fluid injection point. Hence, authors limit themselves to modelling of one half of the fracture. In our work we demonstrate that the case of a…
Fracture propagation is highly sensitive to the conditions at the crack tip. In heterogeneous materials, microscale obstacles can cause propagation instabilities. Macroscopic heterogeneities modify the stress field over scales larger than…
Hydraulic fractures propagating at depth are subjected to buoyant forces caused by the density contrast between fluid and solid. This paper is concerned with the analysis of the transition from an initially radial towards an elongated…
In fractured poroelastic media under high differential stress, the shearing of fractures and faults and the corresponding propagation of wing cracks can be induced by fluid injection. Focusing on low-pressure stimulation with fluid…
We applied a hybrid-dimensional flow model to pressure transients recorded during pumping experiments conducted at the Reiche Zeche underground research laboratory to study the normal opening behavior of fractures due to fluid injection.…
Strong interaction of closely located, nearly parallel hydraulic fractures and its influence on their propagation are studied. Both computational and physical aspects of the problem are considered. It is shown that from the computational…
In impermeable media, a hydraulic fracture can continue to expand even without additional fluid injection if its volume exceeds the limiting volume of a hydrostatically loaded radial fracture. This limit depends on the mechanical properties…
We review microstructural fracture growth models suitable for the study of hydraulic fracture processes in disordered porous materials and present some basic results. It is shown that microstructural models exhibit certain similarities to…
In this paper we demonstrate the influence of the pore pressure to the development of a hydraulically-driven fracture in a poroelastic medium. We present a novel numerical model for propagation of a planar hydraulic fracture and prove its…
Many geo-engineering applications, e.g., enhanced geothermal systems, rely on hydraulic fracturing to enhance the permeability of natural formations and allow for sufficient fluid circulation. Over the past few decades, the phase-field…
In a uniform stress field, a tensile hydraulic fracture will favor propagation in the plane formed by the maximum (most compressive) and intermediate principal stresses. For the propagation of hydraulic fractures in non-uniform stress…
Propagation of a fluid-driven crack in an impermeable linear elastic medium under axis-symmetric conditions is investigated in the present work. The fluid exerting the pressure inside the crack is an incompressible Newtonian one and its…
The propagation of cracks driven by a pressurized fluid emerges in several areas of engineering, including structural, geotechnical, and petroleum engineering. We present a robust numerical framework to simulate fluid-driven fracture…
Hydraulic stimulation is a critical process for increasing the permeability of fractured geothermal reservoirs. This technique relies on coupled hydromechanical processes induced by reservoir stimulation through pressurized fluid injection…
The problem of hydraulic fracture propagation is considered by using its recently suggested modified formulation in terms of the particle velocity, the opening in the proper degree, appropriate spatial coordinates and…
We present a multi-resolution approach for constructing model-based simulations of hydraulic fracturing, wherein flow through porous media is coupled with fluid-driven fracture. The approach consists of a hybrid scheme that couples a…