Related papers: Random lasers with tunable angular spectra for hig…
A color-switchable random laser is designed through directly coupling random laser with a commercial optical fiber. By using a simple approach of selectively coating the random gain layer on the surface of fiber, the red and yellow random…
A laser is not necessarily a sophisticated device: Pumping energy into an amplifying medium randomly filled with scatterers, a powder for instance, makes a perfect "random laser." In such a laser, the absence of mirrors greatly simplifies…
Many imaging applications require increasingly bright illumination sources, motivating the replacement of conventional thermal light sources with light emitting diodes (LEDs), superluminescent diodes (SLDs) and lasers. Despite their…
Broadband coherent light sources are becoming increasingly important for sensing and spectroscopic applications, especially in the mid-infrared and terahertz (THz) spectral regions, where the unique absorption characteristics of a whole…
Currently, no light source exists which is both narrow-band and speckle-free with sufficient brightness for full-field imaging applications. Light emitting diodes (LEDs) are excellent spatially incoherent sources, but are tens of nanometers…
The angular emission pattern of a random laser is typically very irregular and difficult to tune. Here we show by detailed numerical calculations that one can overcome the lack of control over this emission pattern by actively shaping the…
A disordered structure embedding an active gain material and able to lase is called random laser (RL). The RL spectrum may appear either like a set of sharp resonances or like a smooth line superimposed to the fluorescence. A recent letter…
Random lasers (RLs) are intriguing devices with promising applications as light sources for imaging, sensing, super resolution spectral analysis or complex networks engineering. RLs can be obtained from optically pumped dyes, optical fibers…
A two-dimensional (2D) solid-state random laser emitting in the visible is demonstrated, in which optical feedback is provided by a controlled disordered arrangement of air-holes in a dye-doped polymer film. We find an optimal scatterer…
Biologically inspired photonic structures are the key for technological advances and for miniaturized lasers. Here random lasers in dye-doped titania with the disordered structure of paper are proposed. Sharp electromagnetic resonances with…
We design and fabricate an on-chip laser source that produces a directional beam with low spatial coherence. The lasing modes are based on the axial orbit in a stable cavity and have good directionality. To reduce the spatial coherence of…
The spatial coherence of laser sources has limited their application to parallel imaging and projection due to coherent artifacts, such as speckle. In contrast, traditional incoherent light sources, such as thermal sources or light emitting…
A directional random laser mediated by transverse Anderson localization in a disordered glass optical fiber is reported. Previous demonstrations of random lasers have found limited applications because of their multi-directionality and…
In a random laser (RL), a system possessing in itself both resonator and amplifying medium while lacking of a macroscopic cavity, the feedback is provided by the scattering, which forces light to travel across very long random paths. Here…
Light interference in strongly disordered photonic media can generate lasers where random modes are amplified in unpredictable way. The ease of fabrication, along with their low coherence caused by multiple small-linewidth peaks, made…
A fraction of a laser beam array, whose unknown phase relationships must be set to prescribed values, is launched into a scattering media with random transmission. The resulting output speckle pattern is sampled by an array of photodiodes…
Random fiber laser (RFL) based on random distributed feedback and Raman gain has earned much attention in recent years. In this presentation, we demonstrate a powerful linearly polarized RFL with spectral adjustment, in which the central…
The random laser action with coherent feedback by second-harmonic generation (SHG) was experimentally demonstrated in this paper. Compared with the conventional random laser action based on photoluminescence effect, which needs strong…
Linewidth-tunable lasers have great application requirements in the fields of high-resolution spectroscopy, optical communications and other industry and scientific research. Here, the switchable plasmonic scattering of the metal particles…
An efficient method to tune the spatial coherence of a degenerate laser over a broad range with minimum variation in the total output power is presented. It is based on varying the diameter of a spatial filter inside the laser cavity. The…