Related papers: Cavity-enhanced absorption sensing with robust sid…
We characterize a Fabry-Perot microwave cavity designed for trapping atoms and molecules at the antinode of a microwave field. The cavity is fed from a waveguide through a small coupling hole. Focussing on the compact resonant modes of the…
We present the first demonstration of real-time closed-loop control and deterministic tuning of an independently suspended Fabry-Perot optical cavity using digitally-enhanced heterodyne interferometry, realising a peak sensitivity of…
Residual amplitude modulation (RAM) effect in a Pound-Drever-Hall (PDH) technique locked cavity system is analysed in this paper. Frequency shift caused by RAM in PDH is found to be both related to the amplitude of the RAM and to the…
We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-um-wavelength…
We present an optically-detected mechanical accelerometer that achieves a sensitivity of 100 ng/rtHz over a bandwidth of 10kHz and is traceable. We have incorporated a Fabry-Perot fiber-optic micro-cavity that is currently capable of…
Spectra comprised of hundreds of time-components for absorption path lengths up to 130 km have been recorded around 1050 nm by combining two recent techniques, intracavity laser spectroscopy with vertical external cavity surface emitting…
Absorption spectroscopy is widely used to detect samples with spectral specificity. Here, we propose and demonstrate a method for enhancing the sensitivity of absorption spectroscopy. Exploiting multiple light scattering generated by a…
Micro- and nanoscale optical or microwave cavities are used in a wide range of classical applications and quantum science experiments, ranging from precision measurements, laser technologies to quantum control of mechanical motion. The…
Phase-sensitive detection is the essential projective measurement for measurement-based continuous-variable quantum information processing. The bandwidth of conventional electrical phase-sensitive detectors is up to several gigahertz, which…
Measuring low light absorption with combined uncertainty < 1 permille is crucial in a wide range of applications. Popular cavity ring-down spectroscopy can provide ultra-high precision, below 0.01 permille, but its accuracy is strongly…
We study optical cavity locking for laser stabilization through spatial modulation of the phase front of a light beam. A theoretical description of the underlying principle is developed for this method and special attention is paid to…
We propose and experimentally demonstrate a method for non-invasive measurements of cavity parameters by injection of squeezed vacuum into an optical cavity. The principle behind this technique is the destruction of the correlation between…
Broadband ultrafast optical spectroscopy methods, such as transient absorption spectroscopy and 2D spectroscopy, are widely used to study molecular dynamics. However, these techniques are typically restricted to optically thick samples,…
The Pound-Drever-Hall laser stabilization technique requires a fast, low-noise photodetector. We present a simple photodetector design that uses a transformer as an intermediary between a photodiode and cascaded low-noise radio-frequency…
Weak transitions in the (2,0) overtone band of the HD molecule at $\lambda = 1.38 \, \mu$m were measured in saturated absorption using the technique of noise-immune cavity-enhanced optical heterodyne molecular spectroscopy. Narrow…
We present a new cavity-based polarimetric scheme for highly sensitive and time-resolved measurements of birefringence and dichroism, linear and circular, that employs rapidly-pulsed single-frequency CW laser sources and extends current…
We demonstrate the suppression of parametric instability using through optical actuation in an electro-optical feedback loop, stabilising the high order optical mode content in an 80 metre long Fabry-Perot cavity. The loop suppression of…
Optical detection of ultrasound for photoacoustic imaging provides large bandwidth and high sensitivity at high acoustic frequencies. Higher spatial resolutions can therefore be achieved using Fabry-P\'erot cavity sensors, as compared to…
Light from a Tm,Ho:YLF laser operating at 2051 nm is frequency doubled then coupled into a high Fabry-Perot cavity with manufacturer quoted finesse in excess of 300,000. The frequency of the laser is stabilized using the Pound-Drever-Hall…
We have recently introduced the Vernier-based Direct Frequency Comb Cavity-Enhanced Spectroscopy technique and we present the corresponding formalism for quantitative broadband spectroscopy. We achieve high sensitivity and broadband…