Related papers: Microstructural engineering of medium entropy NiCo…
Additively manufactured (AM) aluminum alloys with high strength and thermal stability have broad applications in turbine engines, vacuum pumps, heat exchangers, and many other industrial systems. Employing precipitates with an L1$_2$…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr)…
L12 precipitates are known to significantly enhance the strength and ductility of single-phase face-centered cubic (FCC) medium- or high-entropy alloys (M/HEAs). However, further improvements in mechanical properties remain untapped, as…
Ultrafine-grained aluminum alloys offer interesting multifunctional properties with a combination of high strength, low electrical resistivity, and low density. However, due to thermally induced grain coarsening, they typically suffer from…
The influence of microstructure on thermoelectricity is increasingly recognized. Approaches for microstructural engineering can hence be exploited to enhance thermoelectric performance, particularly through manipulating crystalline defects,…
The tensile creep performance of a polycrystalline Co/Ni-base superalloy with a multimodal gamma prime distribution has been examined at 800C and 300MPa. The rupture life of the alloy is comparable to that of RR1000 tested under similar…
We demonstrate the development of a series of refractory high-entropy alloys containing aluminum AlRHEAs in the ordered BCC-B2 phase by varying the aluminum content within 10 to 25 atomic percent, with the goal of high strength and good…
Two different precipitate hardening aluminium alloys processed by friction stir welding were investigated. The microstructure and the hardness of the as delivered materials were compared to that of the weld nugget. Transmission electron…
Microstructural features and mechanical properties of an Al-Mg-Si alloy processed by high-pressure torsion have been investigated using transmission electron microscopy, X-ray diffraction, three-dimensional atom probe, tensile tests and…
Grain size engineering, particularly reducing grain size into the nanocrystalline regime, offers a promising pathway to further improve the strength-to-weight ratio of Al alloys. Unfortunately, the fabrication of nanocrystalline metals…
Al-Mg-Si alloys are utilized in large scale electrical conduction applications thanks to their low density, high strength, and low electrical resistivity. The alloying elements, Mg and Si, are introduced to improve the mechanical strength;…
The mechanical performance and microstructures of a CoCrNi medium-entropy alloy (MEA) and NCoCrNi, alloyed with 0.5at% N, after high pressure torsion (HPT) and subsequent annealing treatments in a temperature range of 150-1000 {\deg}C were…
Segregation engineering has emerged as a promising pathway towards designing thermally stable nanocrystalline alloys with enhanced mechanical properties. However, the compositional and processing space for solute stabilized microstructures…
Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical…
Lightweight refractory high-entropy alloy coatings (RHEAcs) of NbxMo$_{0.5}$Ti$_{1.5}$Ta$_{0.2}$Cr (where $x=$ 1, 1.3, 1.5, and 2) were fabricated on the surface of 316L stainless steel using laser cladding (LC) technology. A comprehensive…
New approaches for the design of alloy systems with multiprincipal elements is recently researched in refractory materials field. However, most research aimed at arc melting process with weakness of coarsening of grains and inhomogeneous…
A complex study of aging kinetics for both coarse-grained and nanostructured by severe plastic deformation Cu -- 2 wt% Be alloy is reported. It is shown that aging of a coarse-grained alloy leads to continuous formation of nanosized CuBe…
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge…
The present work reported a novel L12-strengthening NiCoCrAlTi high entropy alloy (HEA) with an outstanding synergy of tensile strength and ductility at both ambient and high temperatures. Transmission electron microscopy (TEM)…
As one of the most abundant interstitial elements, nitrogen (N) is effective in improving yield strength of metallic materials, due to interstitial solid solution strengthening. Doping N can substantially enhance the yield strength but…