Related papers: Gradient soft magnetic materials produced by addit…
We present the fabrication of metallic magnetic nanowires using a low temperature chemical process. We show that pressed powders and magnetically oriented samples exhibit a very high coercivity (6.5 kOe at 140 K and 4.8 kOe at 300 K). We…
In this paper we report a detailed investigation of a number of different materials commonly used in precision instrumentation in the view of using them as critical components in the magnetic gradiometer. The materials requirement inside a…
Additive Manufacturing (AM) has enabled the fabrication of metallic cellular materials that are of interest in the design of lightweight impact resistant structures. However, there is a need to understand the interactions between: (i) the…
Three amorphous Co$_x$Nb$_{100-x}$ alloys, Co$_{25}$Nb$_{75}$, Co$_{57}$Nb$_{43}$ and Co$_{80}$Nb$_{20}$, were produced by Mechanical Alloying starting from the elemental powders. Their magnetic properties were determined using an…
Advanced manufacturing (AM) technologies, such as nanoscale additive manufacturing process, enable the fabrication of nanoscale architected materials which has received great attention due to their prominent properties. However, few studies…
Designing alloys for additive manufacturing (AM) presents significant opportunities. Still, the chemical composition and processing conditions required for printability (ie., their suitability for fabrication via AM) are challenging to…
Magnetism of a very thin antiferromagnetic (AFM) surface CuO has been investigated with the partially oxidized nanocomposites of Cu-CuCl, ~ 200 nm. The samples are characterized by X-ray diffraction, X-ray photoelectron spectroscopy,…
In metals additive manufacturing (AM), materials and components are concurrently made in a single process as layers of metal are fabricated on top of each other in the near-final topology required for the end-use product. Consequently, tens…
Initial powder mixtures of Cu, Fe and Co are exposed to severe plastic deformation by high-pressure torsion to prepare solid solutions. A broad range of compositions is investigated, whereas this study aims at the synthesis of soft magnetic…
In additive manufacturing, the optimal processing conditions need to be determined to fabricate porosity-free parts. For this purpose, the design space for an arbitrary alloy needs to be scoped and analyzed to identify the areas of defects…
Atomic vapour cells are an indispensable tool for quantum technologies (QT), but potential improvements are limited by the capacities of conventional manufacturing methods. Using an additive manufacturing (AM) technique - vat polymerisation…
Additive manufacturing (AM; 3D Printing), a process which creates a part layer-by-layer, has the potential to improve upon conventional lightweight mirror manufacturing techniques, including subtractive (milling), formative (casting) and…
The importance of additive manufacturing (AM) to the future of product design and manufacturing systems demands educational programs tailored to embrace its fundamental principles and its innovative potential. Moreover, the breadth and…
Ni-Mn-based Heusler alloys like Ni-Mn-Sn show an elastocaloric as well as magnetocaloric effect during the magneto-structural phase transition, making this material interesting for solid-state cooling application. Material processing by…
This paper presents a novel gradient-informed slicing method for functionally graded additive manufacturing (FGM) that overcomes the limitations of conventional toolpath planning approaches, which struggle to produce truly continuous…
Rapid cooling rates and stochastic interactions between the heat source and feedstock in additive manufacturing (AM) result in strong anisotropy and process-induced defects deteriorating the tensile ductility and fatigue resistance of…
Soft magnetic materials have low coercive fields and high permeability. Recently, nanocrystalline alloys obtained using annealing amorphous alloys have attracted much interest since nanocrystalline alloys with small grain sizes of tens of…
Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport,…
Atomic magnetometers (AMs) offer many advantages over superconducting quantum interference devices (SQUIDs) due to, among other things, having comparable sensitivity while not requiring cryogenics. One of the major limitations of AMs is the…
This paper is devoted to experimental characterisation of linear thermal expansion coefficient (LTEC) and mechanical characteristics of the laser deposited Cu-Fe system multilayer functionally graded (FG) structures and binary Cu-Fe alloys,…