Related papers: Multi-frequency telecom fibered laser system for p…
Multicore fibers (MCF) are perspective media for telecommunications, sensing, imaging and laser technologies. Here, the effect of beam stirring between weakly coupled cores is observed for sub-nanosecond transform-limited pulses of several…
We describe a frequency stabilized diode laser at 698 nm used for high resolution spectroscopy of the 1S0-3P0 strontium clock transition. For the laser stabilization we use state-of-the-art symmetrically suspended optical cavities optimized…
We combined experimental and theoretical investigations of an effective two-level atomic system operating in the near-infrared telecom wavelength regime, realized using hot rubidium vapor confined within a sub-micron-thick cell. In this…
A frequency-stabilized light source emitting at 556 nm is realized by frequency-doubling a 1112-nm laser, which is phase-locked to a fiber-based optical frequency comb. The 1112-nm laser is either an ytterbium (Yb)-doped distributed…
We present a 2-\mum frequency comb based on a reliable mode-locked Er:fiber laser with 100 MHz repetition rate. After shifting the spectrum of the amplified Er:fiber comb to longer wavelengths, a single-clad Tm/Ho:fiber is used as a…
We report a detailed study of the noise properties of a visible-to-telecom photon frequency converter based on difference frequency generation (DFG). The device converts 580 nm photons to 1541 nm using a strong pump laser at 930 nm, in a…
We report the laser cooling and trapping of neutral potassium on an open transition. Fermionic 40K is captured using a magneto-optical trap (MOT) on the closed 4S-4P transition at 767 nm and then transferred, with unit efficiency, to a MOT…
We report the development and characterization of a pulsed 243 nm laser that is optimal for the cooling of positronium (Ps). The laser, which is based on the recent chirped pulse-train generator (CPTG) demonstrated by K. Yamada et al.…
An ultrafast laser based on coherent beam combination of four ytterbium-doped step-index fiber amplifiers is presented. The system delivers an average power of 3.5 kW and a pulse duration of 430 fs at 80 MHz repetition rate. The beam…
A frequency-stable, broadband laser is presented for experiments on trapped ions. Since the design is based on widely available semiconductor optical amplifier technology, similar lasers can be realized for virtually any wavelength in the…
The presence of microbunching instabilities due to the compression of high-brightness electron beams at existing and future X-ray free-electron lasers (FELs) results in restrictions on the attainable lasing performance and renders beam…
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94\mu m, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple,…
We report on a novel pseudothermal light source based on laser light coupled into an optical multimode fiber. The setup is simple, of low cost, exhibits inherently high directional light emission and allows for a flexible arrangement. By…
Carrier envelope phase stable 4 fs near-IR pulses with 3 mJ energy were generated by spectral broadening of circularly polarized 8 mJ pulses in a differentially pumped 2 m long composite stretched exible hollow ber. The pulses were…
A thermal atomic ensemble-based laser source with superior frequency stability is proposed that relies on the accumulated contributions from an abundance of nonzero-transverse-velocity atomic ensembles. Compared with the traditional case in…
Some practical improvements are proposed for the "optical-shaker" laser-cooling technique [I.S. Averbukh and Y. Prior, Phys. Rev. Lett. 94, 153002 (2005)]. The improved technique results in an increased cooling rate and decreases the…
Side-pumping fibre combiners offer several advantages in fibre laser design, including distributed pump absorption, reduced heat load, and improved flexibility and reliability. These benefits are particularly important for all-fibre lasers…
A thermal atomic beam of dysprosium (Dy) atoms is cooled using the $4f^{10}6s^2 (J=8) \to 4f^{10}6s6p (J=9)$ transition at 421 nm. The cooling is done via a standing light wave orthogonal to the atomic beam. Efficient transverse cooling to…
High speed optical telecommunication is enabled by wavelength division multiplexing, whereby hundreds of individually stabilized lasers encode the information within a single mode optical fiber. In the seek for larger bandwidth the optical…
We generate and transmit 75-GHz-bandwidth OFDM signals over the air using three mutually frequency-locked lasers, achieving minimal frequency gap between the wireless W and D bands using optical-assisted approaches, resulting in 173.5 Gb/s…