Related papers: The importance of corner sharpness in the BARC tes…
Adaptive mesh refinement (AMR) in the high-order spectral-element method code Nek5000 is demonstrated and validated with well-resolved large-eddy simulations (LES) of the flow past a wing profile. In the present work, the flow around a NACA…
A new approach to turbulence simulation, based on a combination of large-eddy simulation (LES) for the whole flow and an array of non-space-filling quasi-direct numerical simulations (QDNS), which sample the response of near-wall turbulence…
Direct Numerical Simulations (DNSs) are one of the most powerful tools for studying turbulent flows. Even if achievable Reynolds numbers are lower than those obtained with experimental means, there is a clear advantage since the entire…
Direct numerical simulation of open-channel flow over a bed of spheres arranged in a regular pattern has been carried out at bulk Reynolds number and roughness Reynolds number (based on sphere diameter) of approximately 6900 and 120,…
In this article we examine channel flow subject to spatially varying viscosity in the streamwise direction. The Reynolds number is imposed locally with three different ramps. The setup is reminiscent of transient channel flow, but with a…
Direct Numerical Simulations are used to solve turbulent flow and heat transfer over a variety of rough walls in a channel. The wall geometries are exactly resolved in the simulations. The aim is to understand the effect of roughness…
This study presents an experimental dataset documenting the evolution of a turbulent boundary layer downstream of a rough-to-smooth surface transition. To investigate the effect of upstream flow conditions, two groups of experiments are…
Turbulent boundary layers under adverse pressure gradients are studied using well-resolved large-eddy simulations (LES) with the goal of assessing the influence of the streamwise pressure development. Near-equilibrium boundary layers were…
Simulation of turbulent flows at high Reynolds number is a computationally challenging task relevant to a large number of engineering and scientific applications in diverse fields such as climate science, aerodynamics, and combustion.…
A series of direct numerical simulations in large computational domains has been performed in order to probe the spatial feature robustness of the Taylor rolls in turbulent Taylor-Couette (TC) flow. The latter is the flow between two…
Studies of the relation between the shear parameter S^* and the Reynolds number Re are presented for a nearly homogeneous and statistically stationary turbulent shear flow. The parametric investigations are in line with a generalized…
The flow past a fixed finite-length circular cylinder, the axis of which makes a nonzero angle with the incoming stream, is studied through fully-resolved simulations, from creeping-flow conditions to strongly inertial regimes. The…
This experimental and numerical study examines transition to turbulence for a Cone-Cylinder-Flare geometry at Mach 7 and across a broad Reynolds number range. The focus is set on both attached boundary layers and separated shock-boundary…
Statistical properties of turbulent Rayleigh-Benard convection at low Prandtl numbers (Pr), which are typical for liquid metals such as mercury, gallium or liquid sodium, are investigated in high-resolution three-dimensional spectral…
Aerodynamic prediction of glaze ice accretion on airfoils and wing is studied using the Reynolds-averaged Navier-Stokes method. Two separation fixed turbulence models are developed considering the nonequilibrium characteristics of…
Direct numerical simulations are carried out to investigate the flow features responsible for secondary tones arising in trailing-edge noise at moderate Reynolds numbers. Simulations are performed for a NACA 0012 airfoil at freestream Mach…
This work determines the inaccuracy of using Reynolds averaged Navier Stokes (RANS) turbulence models in transition to turbulent flow regimes by predicting the model-based discrepancies between RANS and large eddy simulation (LES) models…
Marginal stability arguments are used to describe the rotation-number dependence of torque in Taylor-Couette (TC) flow for radius ratios $\eta \geq 0.9$ and shear Reynolds number $Re_S=2\times 10^4$. With an approximate representation of…
We study turbulent flows in pressure-driven ducts with square cross-section through direct numerical simulation in a wide enough range of Reynolds number to reach flow conditions which are representative of fully developed turbulence.…
Numerical simulations based on Reynolds-Averaged Navier--Stokes (RANS) equations are widely used in engineering design and analysis involving turbulent flows. However, RANS simulations are known to be unreliable in many flows of engineering…