Related papers: Height-Dependent LoS Probability Model for A2G MmW…
In spite of its potential advantages, the large-scale implementation of the device-to-device (D2D) communications has yet to be realized, mainly due to severe interference and lack of enough bandwidth in the microwave ($\mu$W) band.…
A reconfigurable intelligent surface (RIS) reflects incoming signals in different ways depending on the phase-shift pattern assigned to its elements. The most promising use case is to aid the communication between a base station and a user…
In the present study, a measurement setup utilizing mm-wave transceivers with steerable directive antennas, mounted on both a customized UAV and a ground station has been used to study Air-to-Ground (A2G) radio links and, more generally,…
Providing reliable connectivity to cellular-connected UAV can be very challenging; their performance highly depends on the nature of the surrounding environment, such as density and heights of the ground BSs. On the other hand, tall…
This paper presents a new large-scale propagation path loss model to design a fifth-generation (5G) wireless communication system for indoor environments. Simulations for the indoor environment, for all polarization at non-line-of-sight…
5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization…
This paper presents field measurement-based channel characterization for air--to--ground (A2G) and air--to--air (A2A) wireless communication systems using two drones equipped with lightweight software-defined radios. A correlation-based…
The need to carry out analytical studies of wireless systems often motivates the usage of simplified models which, despite their tractability, can easily lead to an overestimation of the achievable performance. In the case of dense small…
Today, mobile operators are starting to deploy Fifth-Generation (5G) networks to expand the coverage ubiquity of broadband wireless service. In contrast, in-flight connectivity remains limited and its quality of service does not always meet…
Path loss is a significant component of wireless communication channel design and analysis and reflects the reduction in a transmitted signal's power density. Due to the differences in the propagation conditions, wireless aerial channels'…
Radio wave propagation simulations based on the ray-optical approximation have been widely adopted in coverage analysis for a range of situations, including the outdoor-to-indoor scenario. This work presents O2I ray-tracing simulations…
The fast motion of Low Earth Orbit (LEO) satellites causes the propagation channel to vary rapidly, and its behavior is strongly shaped by the surrounding environment, especially at low elevation angles where signals are highly susceptible…
Millimeter wave (mmWave) has attracted considerable attention due to its wide bandwidth and high frequency. However, it is highly susceptible to blockages, resulting in significant degradation of the coverage and the sum rate. A promising…
The impact of buildings blockage on the UAVs communications in different UAVs heights is studied, when UAVs fly in a given rectangular urban area. This paper analyzes the properties of blockage behavior of communication links between UAVs…
To provide high data rate aerial links for 5G and beyond wireless networks, the integration of free-space optical (FSO) communications and aerial platforms has been recently suggested as a practical solution. To fully reap the benefit of…
Growing requirements of future wireless communication systems, such as high data rates, high reliability, and low latency, make the active usage of Non-Terrestrial Networks (NTN) an inevitable necessity. In this regard, High Altitude…
mm-waves are envisaged as key enabler for 5G and 6G wireless communications, thanks to the wider bandwidth and to the possibility of implementing large-scale antenna arrays and new advanced transmission techniques, such as massive MIMO and…
This paper focuses on Point-to-Point LoRa connections. We report on coverage measurements performed in three distinct environments, i.e., coastal, forest and urban. Our field experiments demonstrate coverage up to 1 km with antennas at only…
Since the orthogonality of the line-of-sight multiple input multiple output (LoS MIMO) channel is only available within the Rayleigh distance, coverage of communication systems is restricted due to the finite implementation spacing of…
Simultaneous use of high-end wearable wireless devices like smart glasses is challenging in a dense indoor environment due to the high nature of interference. In this scenario, the millimeter wave (mmWave) band offers promising potential…