Related papers: Injection Feedback for a Storage Ring
We report on studies of the loss maps for particles travelling from the end of the ThomX's linac along the transfer line to the end of the ring first turn in preparation of the machine commissioning. ThomX is a 50-MeV-electron accelerator…
As part of the R\&D for the 50 MeV ThomX Compton source project, we have studied the effect of several beam dynamics processes on the evolution of the beam in the ring. The processes studied include among others Compton scattering,…
Injection performance of storage ring is one of the important factors for the light efficiency and quality of Synchrotron Radiation Facility when it is in top-up mode. To evaluate the injection performance of storage ring at SSRF, we build…
In order to double the positron injection rate into the KEKB ring, a two-bunch acceleration scheme has been studied at the linac, in which bunches separated by 96 ns are accelerated in 50 Hz. In this scheme the stabilization of energy and…
An on-axis injection scheme using a double-frequency RF system in a storage ring with small dynamic aperture is proposed. By altering RF voltages, empty RF buckets can be created which will be used for on-axis injection. After bunches are…
Three-dimensional spiral injection enables beam storage in ultra-compact rings with nanosecond revolution periods. We report first storage of a $297 \, \mathrm{keV/}c$ electron beam in a $22 \,\mathrm{cm}$ weak-focusing ring with a…
This paper presents history and evolution of the intra-bunch feedback system for circular accelerators. This pro-ject has been presented by John D. Fox (SLAC/Stanford Un.) at the IPAC2010 held in Kyoto. The idea of the pro-posal is to build…
Using calculations and mathematical modeling, we demonstrate the feasibility of constructing a synchrotron storage ring for neutral polar molecules. The lattice is a racetrack type 3.6 m in circumference consisting of two of 180-degree…
A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. The system uses the…
Modern fourth-generation storage ring light sources predominantly utilize digital I/Q-based proportional-integral (PI) feedback for their radio-frequency (RF) systems. This paper introduces a dedicated PI feedback model implemented in the…
A new scheme to produce very low emittance muon beams using a positron beam of about 45~GeV interacting on electrons on target is presented. One of the innovative topics to be investigated is the behaviour of the positron beam stored in a…
In order to achieve its ambitious luminosity target, the SuperKEKB collider must achieve and sustain high beam currents on the order of Ampere in its storage rings. This requires continuous top-up injection and operation with a two-bunch…
The beam-ion interaction is a potential limitation of beam performance in electron accelerators, especially where the beam emittance is of a great concern in future ultra-low emittance light source. "Conventionally", the beam instability…
The stellarator-type storage ring for accumulation of multi- Ampere proton and ion beams with energies in the range of $100~AkeV$ to $1~AMeV$ is designed at Frankfurt university. The main idea for beam confinement with high transversal…
In order to improve the stability of synchrotron radiation, we developed a new method of machine learning-based closed orbit feedback and piloted it in the storage ring of the Shanghai Synchrotron Radiation Facility (SSRF). In our…
Submitted as input for discussions on a possible low emittance muon accumulator at 50 TeV. I present a scheme to obtain high quality positive and negative muon beams in terms of low emittance, high charge and high energy using an…
We suggest a new on-axis injection scheme that uses two deflecting cavities to remove the tilt of the stored beam, and to kick the injected beam into the ring. In this new injection scheme, an injected beam with a certain angle is overlaid…
A new accelerator complex, HIAF (the High Intensity Heavy Ion Accelerator Facility), has been approved in China. It is designed to provide intense primary and radioactive ion beams for research in high energy density physics, nuclear…
In order to ensure the beam quality and meet the requirements introduced by the BEPCII storage ring, the beam energy feedback system has been developed at the exit of the linac. This paper describes the implementation and commissioning of…
The intra-beam repulsions play a significant role in determining the performances of free-electron devices when an high brilliance of the beam is required. The transversal and longitudinal spread of the beam, its energy and density are…