Related papers: Numerical Study on Beam-based Alignment of SXFEL U…
The use of strongly bent crystals in spectrometers for pulses of a hard x-ray free-electron laser is explored theoretically. Diffraction is calculated in both dynamical and kinematical theories. It is shown that diffraction can be treated…
X-ray free-electron lasers (XFELs) utilize high-density and high-energy electron bunches which are well-suited to produce Compton back-scattering radiation. Here we study back-scattered radiation pulses produced by the interaction of XFEL…
The magnetic gap of the baseline XFEL undulators can be varied mechanically for wavelength tuning. In particular, the wavelength range 0.1 nm - 0.4 nm can be covered by operating the European XFEL with the SASE2 undulator. The length of the…
The LCLS baseline includes a planar undulator system, producing linearly polarized light in the range 0.15-1.5 nm. Polarization control in the soft X-ray region from linear to circular is highly desirable. Several schemes using helical…
An evolution of the electron distribution function in the beam-plasma system with the return current is computed numerically for different parameters. The X-ray bremsstrahlung corresponding to such an electron distribution is calculated and…
Free Electron Lasers (FEL) are commonly regarded as the potential key application of laser wakefield accelerators (LWFA). It has been found that electron bunches exiting from state-of-the-art LWFAs exhibit a normalized 6-dimensional beam…
XFELs provide X-ray pulses with unprecedented peak brightness and ultrashort duration. They are usually driven by planar undulators, meaning that the output radiation is linearly polarized. For many experimental applications, however,…
Ultrafast electron diffraction (UED) is a technique in which short-pulse electron beams can probe the femtosecond-scale evolution of atomic structure in matter driven far from equilibrium. As an accelerator physics challenge, UED imposes…
A high-precision intra-bunch-train beam orbit feedback correction system has been developed and tested in the ATF2 beamline of the Accelerator Test Facility at the High Energy Accelerator Research Organization in Japan. The system uses the…
A local Bundle Adjustment (BA) on a sliding window of keyframes has been widely used in visual SLAM and proved to be very effective in lowering the drift. But in lidar SLAM, BA method is hardly used because the sparse feature points (e.g.,…
The X-ray free-electron laser oscillator (XFELO) has recently been reconsidered a promising candidate for producing high-brightness, fully coherent pulses in the hard X-ray regime. This letter proposes a gain-guided XFELO scheme, avoiding…
Point Spread Function (PSF) engineering is used in single emitter localization to measure the emitter position in 3D and possibly other parameters such as the emission color or dipole orientation as well. Advanced PSF models such as spline…
The production of X-ray radiation with a high degree of circular polarization constitutes an important goal at XFEL facilities. A simple scheme to obtain circular polarization control with crossed undulators has been proposed so far. In its…
In this paper, a fully coherent radiation option with controllable polarization is proposed for Shanghai deep ultraviolet free electron laser (FEL) test facility. Intensive start-to-end simulation suggests that, the two crossed planar…
Bragg coherent X-ray diffraction imaging (BCDI) allows the three-dimensional (3D) measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D…
X-ray mirrors with high focusing performances are in use in both mirror modules for X-ray telescopes and in synchrotron and FEL (Free Electron Laser) beamlines. A degradation of the focus sharpness arises in general from geometrical…
In an injector system of an X-ray free electron laser (XFEL), solenoid lenses are typically used to confine low-emittance electron beams to low-energy region below a few MeV. Because non-thermionic emittance at such a low-energy region is…
The low energy part of the FAST linear accelerator based on 1.3 GHz superconducting RF cavities was successfully commissioned. During commissioning, beam based model dependent methods were used to correct linear lattice and trajectory.…
A technique for production of an electron beam with a high transverse emittance ratio. a "flat" beam, has been proposed by Brinkmann, Derbenev, and Floettmann.[1] The cathode of an RF-laser gun is immersed in a solenoidal magnetic field; as…
A fully digital beam position and phase measurement (BPPM) system was designed for the linear accelerator (LINAC) in Accelerator Driven Sub-critical System (ADS) in China. Phase information is obtained from the summed signals from four…