Related papers: Shearing Mechanisms of Co-Precipitates in IN718
The excellent mechanical properties of the Ni-based superalloy IN718 mainly result from coherent $\gamma''$ precipitates. Due to a strongly anisotropic lattice misfit between the matrix and the precipitate phase, the particles exhibit…
Co-base superalloys are considered as promising high temperature materials besides the well-established Ni-base superalloys. However, Ni appears to be an indispensable alloying element also in Co-base superalloys. To address the influence…
The Ni-based superalloy Alloy 718 is used in aircraft engines as high-pressure turbine discs and must endure challenging demands on high-temperature yield strength, creep-, and oxidation-resistance. Nanoscale $\gamma^{\prime}$- and…
Precipitation-strengthened alloys, such as Ni-base, Co-base and Fe-base superalloys, show the development of dendrite-like precipitates in the solid state during aging at near-$\gamma^{\prime}$ solvus temperatures. These features arise out…
Ni-based superalloy Inconel-718 is ubiquitous in metal 3D printing where high cooling rate and thermal gradient are present. These manufacturing conditions are conducive to high initial dislocation density and porosity or void in the…
Order strengthening in nickel-based superalloys is associated with the extra stress required for dislocations to bypass the $\gamma'$ precipitates distributed in the $\gamma$ matrix. A rich variety of bypass mechanism has been identified,…
Cobalt-based alloys with {\gamma}/{\gamma}' microstructures have the potential to become the next generation of superalloys, but alloy compositions and processing steps must be optimized to improve coarsening, creep, and rafting behavior.…
A systematic study of the compression creep properties of a single-crystalline Co-base superalloy (Co-9Al-7.5W-2Ta) was conducted at 950 {\deg}C, 975 {\deg}C and 1000 {\deg}C to reveal the influence of temperature and the resulting…
The two-dimensional dislocation dynamics approach has been recently used for analyzing plastic deformation in metals and alloys at elevated temperatures. The two-dimensional approach, however, only accounts for the dislocation climbing…
The governing mechanistic behaviour of Directed Energy Deposition Additive Manufacturing (DED-AM) is revealed by a combined in situ and operando synchrotron X-ray imaging and diffraction study of a nickel-base superalloy, IN718. Using a…
A mesoscale study of a single crystal nickel-base superalloy subjected to an industrially relevant process simulation has revealed the complex interplay between microstructural development and the micromechanical behaviour. As sample gauge…
Understanding the creep mechanisms and deformation response at different stresses and temperatures is crucial for design using nickel-base superalloys for high-temperature applications. In this study, the creep behaviour of a newly designed…
We investigate shear-induced crystallization in a very dense flow of mono-disperse inelastic hard spheres. We consider a steady plane Couette flow under constant pressure and neglect gravity. We assume that the granular density is greater…
Predicting the mechanical failure of parts in service requires understanding their deformation behavior, and associated dynamic microstructural evolution up to the near-atomic scale. Solutes are known to interact with defects generated by…
We show that alloying with rare earth metals (REMs) can dramatically improve the machineability of a range of titanium alloys, even though the REM is not incorporated in the alloy matrix. The mechanism for this is that under cutting, shear…
The role of TCP phases in deformation of superalloys and steels is still not fully resolved. In particular, the intrinsic deformation mechanisms of these phases are largely unknown including the active slip systems in most of these complex…
Dynamic mode decomposition method is deployed to investigate the heat transfer mechanism in a compressible turbulent shear layer and shockwave. To this end, highly resolved Large Eddy Simulations are performed to explore the effect of wall…
Simple homogeneous shear flows of frictionless, deformable particles are studied by particle simulations at large shear rates and for differently soft, deformable particles. The particle stiffness sets a time-scale that can be used to scale…
The deformation behaviour of the intermetallic Al$_{2}$Cu-phase was investigated using atomistic simulations and micropillar compression, where slip on the unexpected {211} and {022} slip planes was revealed. Additionally, all possible slip…
Shear banding, or localization of intense strains along narrow bands, is a plastic instability in solids with important implications for material failure in a wide range of materials and across length-scales. In this paper, we report on a…