Related papers: A Design Study on Adaptive Primaries for 1-2 Meter…
Astronomical telescopes suffer from a tradeoff between field of view (FoV) and image resolution: increasing the FoV leads to an optical field that is under-sampled by the science camera. This work presents a novel computational imaging…
Adaptive optics (AO) is a powerful image correction technique with proven benefits for many life-science microscopy methods. However, the complexity of adding a reflective wavefront modulator and a wavefront sensor into already complicated…
As we enter the era of TESS and JWST, instrumentation that can carry out radial velocity measurements of exoplanet systems is in high demand. We will address this demand by upgrading the UC Lick Observatory's 2.4-meter Automated Planet…
We describe an adaptive optics technique for two-photon microscopy in which the deformable mirror used for aberration compensation is positioned in a plane conjugate to the plane of the aberration. We demonstrate in a proof-of-principle…
The imaging performance of an optical microscope can be degraded by sample-induced aberrations. A general strategy to undo the effect of these aberrations is to apply wavefront correction with a deformable mirror (DM). In most cases, the DM…
Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical…
There are scientific and technological needs to improve the co-phasing of the primary mirrors of segmented telescopes. We have developed a methodology for using the wavefront sensor of an adaptive optics (AO) system to disentangle the phase…
The availability and performance of laser-based adaptive optics (AO) systems are strongly dependent on the power and quality of the laser beam before being projected to the sky. Frequent and time-consuming alignment procedures are usually…
Due to turbulence in the atmosphere images taken from ground-based telescopes become distorted. With adaptive optics (AO) images can be given greater clarity allowing for better observations with existing telescopes and are essential for…
Micro-electro-mechanical systems (MEMS) technology can provide for deformable mirrors (DMs) with excellent performance within a favorable economy of scale. Large MEMS-based astronomical adaptive optics (AO) systems such as the Gemini Planet…
In order to increase the corrected field of view of an adaptive optics (AO) system, several deformable mirrors (DM) have to be placed in the conjugate planes of the dominant turbulent layers (multi-conjugate adaptive optics, MCAO [Beckers…
An Adaptive secondary mirror (ASM) allows for the integration of adaptive optics (AO) into the telescope itself. Adaptive secondary mirrors, based on hybrid variable reluctance (HVR) actuator technology, developed by TNO, provide a…
Adaptive (or deformable) mirrors are widely used as wavefront correctors in adaptive optics systems. The optical calibration of an adaptive mirror is a fundamental step during its life-cycle: the process is in facts required to compute a…
Adaptive optics (AO) have been used to correct wavefronts to achieve diffraction limited point spread functions in a broad range of optical applications, prominently ground-based astronomical telescopes operating in near infra-red. While…
Adaptive optics normally concerns the feedback correction of phase aberrations. Such correction has been of benefit in various optical systems, with applications ranging in scale from astronomical telescopes to super-resolution microscopes.…
Active optics is defined as the control of the shape and the alignment of the components of an optical system at low temporal frequencies. For modern large telescopes with flexible monolithic or segmented primary mirrors and also flexible…
Over the last few years, several interesting observations were obtained with the help of solar Adaptive Optics (AO). In this paper, few observations made using the solar AO are enlightened and briefly discussed. A list of disadvantages with…
Sensitivity and resolution of space telescopes are directly related to the size of the primary mirror. Enabling such future extremely large space telescopes or even arrays of those will require to drastically reduce the areal weight of the…
Multifocal plane microscopy (MUM) allows three dimensional objects to be imaged in a single camera frame. Our approach uses dual orthogonal diffraction phase gratings with a quadratic distortion of the lines to apply defocus to the first…
We have created a new autonomous laser-guide-star adaptive-optics (AO) instrument on the 60-inch (1.5-m) telescope at Palomar Observatory called Robo-AO. The instrument enables diffraction-limited resolution observing in the visible and…