Related papers: Deformation Behaviour of Ion-Irradiated FeCr: A Na…
Irradiation-induced ductility loss is a major concern facing structural steels in next-generation nuclear reactors. Currently, the mechanisms for this are unclear but crucial to address for the design of reactor components. Here, the…
Ion-irradiated FeCr alloys are useful for understanding and predicting neutron-damage in the structural steels of future nuclear reactors. Previous studies have largely focused on the structure of irradiation-induced defects, probed by…
Fe-Cr binary alloys serve as simplified model systems to study irradiation damage relevant to fusion structural materials. Here, Fe-3%Cr and Fe-5%Cr samples were irradiated with 4 MeV Fe ions under a dose rate of 4x10^5 dpa/s across a…
In this paper, we investigate plasticity in irradiated FeCrAl nanopillars using discrete dislocation dynamics simulations (DDD), with comparisons to transmission electron microscopic (TEM) in situ tensile tests of ion and neutron irradiated…
In this paper, experimental work is supported by multi-scale numerical modeling to investigate nanomechanical response of pristine and ion irradiated with Fe2+ ions with energy 5 MeV high purity iron specimens by nanoindentation and…
Ferritic/martensitic steels will be used as structural components in next generation nuclear reactors. Their successful operation relies on an understanding of irradiation-induced defect behaviour in the material. In this study, Fe and FeCr…
FeCrAl ODS steels for accident tolerant fuel claddings are designed to bear high-Cr and Al for enhancing oxidation resistance. In this study, we investigated the effects of Cr content on ion-irradiation hardening of three ODS ferritic…
In this work, the evolution of nanomechanical properties was studied systematically as a function of temperature, chemical, and microstructural complexity of different Fe-based alloys. Experiments were performed at different temperatures…
Pure Fe and model Fe-Cr alloys containing 5, 10 and 14%Cr were irradiated with Fe+ ions at a maximum energy of 2MeV to the same dose of 0.6dpa at temperatures of 300 C, 400 C and 500 C, and at dose rates corresponding to 6 x 10-4 dpa/s and…
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain…
Understanding the evolution of dislocation structures during plastic deformation is critical for predicting the mechanical performance of metallic materials. In this work, we applied in situ scanning electron microscopy/electron backscatter…
A cluster deposition method was used to produce films of loosely aggregated nanoclusters (NC) of Fe core-Fe3O4 shell or fully oxidized Fe3O4. Films of these NC on Si(100) or MgO(100)/Fe3O4(100) were irradiated to 10^16 Si2+/cm2 near room…
Nanoindentation, a common technique for probing the mechanical properties of crystalline materials, exhibits both surface and bulk-dominated responses that are linked to the parent crystal's elasticity and plasticity. For FCC crystals, the…
Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron…
Neutron irradiation in structural alloys promotes defect clustering, which suppresses plasticity and triggers a ductile-to-brittle transition (DBT), a key degradation mechanism limiting fracture resistance in nuclear materials. This study…
This work gives insights into processing and characterisation of bulk nanocrystalline FeCr materials. The investigated FeCr alloys, consisting of 30, 50 and 70 at.% ferromagnetic Fe and remaining anti-ferromagnetic Cr, are processed by arc…
Multicomponent alloys undergoing irradiation damage develop radiation-induced composition redistribution at point defect sinks such as grain boundaries (GBs) and dislocations. Such redistribution results in undesired changes to their…
Neutron irradiation induces in steels nanostructural changes, which are at the origin of the mechanical degradation that these materials experience during operation in nuclear power plants. Some of these effects can be studied by using as…
Ion implantation is widely used as a surrogate for neutron irradiation in the investigation of radiation damage on the properties of materials. Due to the small depth of damage, micromechanical methods must be used to extract material…
The effects of ionizing radiation on materials often reduce to "bad news." Radiation damage usually leads to detrimental effects such as embrittlement, accelerated creep, phase instability, and radiation-altered corrosion. This last point…