Related papers: Performance of wall-modeled LES with boundary-laye…
The present study assesses the performance of the Wall Adapting SGS models along with the Dynamic Smagorinsky model for flows involving separation, reattachment and swirl. Due to the simple geometry and wide application in a variety of…
A scale resolving hybrid RANS-LES technique is applied to an aircraft-nacelle configuration under transonic flow conditions using the unstructured, compressible TAU solver. Therefore, a wall modelled LES methodology is locally applied to…
In the lattice Boltzmann method (LBM), the widely utilized wall boundary is the bounce-back (BB) boundary, which corresponds to the no-slip boundary. The BB boundary prevents the LBM from capturing the accurate shear drag on the wall when…
Studies in the literature on plane turbulent wall jets on flat surfaces, have invariably considered either the nozzle initial conditions or the asymptotic conditions far downstream, as scaling parameters for the streamwise variations of…
We propose an enhanced wall-boundary treatment for the lattice Boltzmann method (LBM), designed for high-Reynolds-number turbulent flows on adaptively refined Cartesian grids. The method improves the slip-velocity bounce-back scheme by…
Large-eddy simulation (LES) is able to capture key boundary-layer (BL) turbulence and cloud processes. Yet, large-scale forcing and surface turbulent fluxes of sensible and latent heat are often poorly prescribed for LES simulations. We…
Measurement techniques such as Magnetic Resonance Velocimety (MRV) and Magnetic Resonance Concentration (MRC) are useful for obtaining 3D time-averaged flow quantities in complex turbulent flows, but cannot measure turbulent correlations or…
Flows in square channels are common in applications, such as automotive after-treatment systems and heat exchangers. Flows with axial flow entry are well understood, but for oblique flow entry, there is no clarity on the additional pressure…
We describe a generalization of the Coupled Wake Boundary Layer (CWBL) model for wind-farms that can be used to evaluate the performance of wind-farms under arbitrary wind inflow directions whereas the original CWBL model (Stevens et al.,…
This paper studies the large-eddy simulation (LES) of isothermal turbulent channel flows. We investigate zero-equation algebraic models without wall function or wall model: functional models, structural models and mixed models. In addition…
Large-eddy simulations (LES) of a planar turbulent lean hydrogen-air jet flame at Re = 11000 are performed using a tabulated flamelet model based on mixture-averaged diffusion that incorporates detailed transport, including differential and…
In this study, five ice shapes generated at NASA Glenn's Icing Research Tunnel (IRT) are simulated at multiple angles of attack (Broeren et al., J. of Aircraft, 2018). These geometries target different icing environments, both early-time…
The continuum approach employing porous media models is a robust and efficient solution method in the area of the simulation of fixed-bed reactors. This paper applies the double-averaging methodology to refine the continuum approach,…
Recently, Kami\'nski et al. [1] demonstrated that a two-dimensional streamwise waviness with carefully selected amplitude and period can be effectively used in postponement of a flow separation at high Reynolds number which is out of reach…
A turbulent side-wall quenching (SWQ) flame in a fully developed channel flow is studied using Large-Eddy Simulation (LES) with a tabulated chemistry approach. Three different flamelet manifolds with increasing levels of complexity are…
A wall-resolved large-eddy simulation (LES) of the fluid flow around a 30P30N airfoil is conducted at a Reynolds number of Rec=750,000 and an angle of attack (AoA) of 9 degrees. The simulation results are validated against experimental data…
This study presents wall-resolved large-eddy simulations (WRLES) of a high-lift airfoil, based on high-order flux reconstruction (FR) commercial software Dimaxer, which runs on consumer level GPUs. A series of independence tests are…
A machine learning method to predict steady external fluid flows using elliptic input features is introduced. Using data from as few as one high-fidelity simulation, the proposed method produces models generalizable under changes to…
Predictive simulation of many complex flows requires moving beyond Reynolds-averaged Navier-Stokes (RANS) based models to representations resolving at least some scales of turbulence in at least some regions of the flow. To resolve…
This study investigates a mechanism of controlling separated flows around an airfoil using a synthetic jet (SJ). A large-eddy simulation (LES) was performed for a leading-edge separation flow around a NACA0015 airfoil at the chord Reynolds…