Related papers: Effects of current limit for grid forming converte…
The grid-forming converter is an important unit in the future power system with more inverter-interfaced generators. However, improving its performance is still a key challenge. This paper proposes a generalized architecture of the…
When grid-forming (GFM) inverter-based resources (IBRs) face severe grid disturbances (e.g., short-circuit faults), the current limitation mechanism may be triggered. Consequently, the GFM IBRs enter the current-saturation mode, inducing…
The energy transition is causing many stability-related challenges for power systems. Transient stability refers to the ability of a power grid's bus angles to retain synchronism after the occurrence of a major fault. In this paper a…
Unified virtual oscillator controller (uVOC) inherits the rigorous analytical foundation offered by oscillator based grid-forming (GFM) controllers and enables fast over-current limiting and fault ride-through (FRT). Control design for…
Transients of a grid-synchronized voltage source converter (VSC) are closely related to over- currents and voltages occurred under large disturbances (e.g. a grid fault). Previous analysis in evaluating these transients usually neglect the…
In this paper, we analytically study the transient stability of grid-connected converters with grid-forming complex droop control, also known as dispatchable virtual oscillator control. We prove theoretically that complex droop control, as…
Voltage support capability is critical for grid-forming (GFM) inverters with current-limiting control (CLC) during grid faults. Despite the findings on the voltage support for symmetrical grid faults, its applicability to more common but…
This work investigates the transient and dynamical behavior of hybrid AC/DC systems using dual-port grid-forming (GFM) control. A generalized modeling framework for hybrid AC/DC networks is first introduced that accounts for converter,…
Virtual inertia is an effective control approach to attenuate sudden voltage changes during transient events in low-inertia DC grids. While methods have been proposed to implement virtual inertia, its impact on DC grid stability in the…
With the increased penetration of renewable energy and reduced proportion of synchronous generators, the low-inertia characteristics of todays power system become prominent, and the transient stability issue of grid following converter…
The popular single-input single-output control structures and classic design methods (e.g., root locus analysis) for the power control of grid-forming converters have limitations in applying to different line characteristics and providing…
As renewable sources increasingly replace existing conventional generation, the dynamics of the grid drastically changes, posing new challenges for transmission system operations, but also arising new opportunities as converter-based…
Unlike conventional generators, inverter-based generation do not possess any rotational inertia. While grid-forming inverters can synthesize small (virtual) inertia via advanced feedback control loops, additional control mechanisms are…
In this work, we investigate grid-forming (GFM) control for dc/ac voltage source converters (VSC) under unbalanced system conditions and unbalanced faults. To fully leverage the degrees of freedom of VSCs, we introduce the concept of…
VSG control has emerged as a crucial technology for integrating renewable energy sources. However, renewable energy have limited tolerance to overcurrent, necessitating the implementation of current limiting (CL)strategies to mitigate the…
Grid-forming voltage source converters (GFM-VSCs) are emerging as a solution for integrating renewable energy resources (RERs) into power systems. GFM-VSCs need a self-synchronisation strategy to ensure that all converters and generators in…
The increasing use of power electronics converters to integrate renewable energy sources has been subject of concern due to the resonance oscillatory phenomena caused by their interaction with poorly damped AC networks. Early studies are…
As the proportion of converter-interfaced renewable energy resources in the power system is increasing, the strength of the power grid at the connection point of wind turbine generators (WTGs) is gradually weakening. Existing research has…
We analyze a dual-port grid-forming (GFM) control for power systems containing ac and dc transmission, converter-interfaced generation and energy storage, and legacy generation. To operate such a system and provide standard services,…
Grid-forming (GFM) capability requirements are increasingly imposed on grid-connected voltage-source converters (VSCs). Under large grid disturbances, GFM-VSCs need to remain stable while providing GFM services. Yet, such objectives, as…