Related papers: Highly efficient BiVO4 single-crystal nanosheets w…
Simple, yet versatile, methods to functionalize graphene flakes with metal (oxide) nanoparticles are in demand, particularly for the development of advanced catalysts. Herein, based on light-induced electrochemistry, a laser-assisted,…
The conversion efficiency of dye-sensitized solar cells (DSSCs) is optimized by modifying the optical design and improving absorbance within the cell. These objectives are obtained by creating different sized cavities in TiO2 photoanode.…
Using field-emission resonance spectroscopy with an ultrahigh vacuum scanning tunneling microscope, we reveal Stark-shifted image-potential states of the v_1/6 and v_1/5 borophene polymorphs on Ag(111) with long lifetimes, suggesting high…
Photocatalytic water splitting is an effective way to obtain renewable clean energy. The challenge is to design tunable photocatalyst to meet the needs in different environments. At the same time, the oxygen and hydrogen evolution reactions…
Pd-based anodes for alcohol oxidation suffer from surface poisoning and sluggish kinetics. Here, we developed Pd-Nb2O5/C nanocomposites to improve ethanol electrooxidation kinetics and CO tolerance in alkaline media. Orthorhombic Nb2O5…
The prospects of scaling current photovoltaic technologies to terawatt levels remain uncertain. All-oxide photovoltaics could open rapidly scalable manufacturing routes, if only oxide materials with suitable electronic and optical…
Here, we report the catalytic degradation of organic compounds by exploiting the magnetoelectric (ME) nature of cobalt ferrite-bismuth ferrite (CFO-BFO) core-shell nanoparticles. The combination of magnetostrictive CFO with the multiferroic…
A simple refluxing wet-chemical approach is employed for fabricating In2S3/Pt-TiO2 heterogeneous catalysts for hydrogen generation under visible light irradiation. When the mass ratio between Pt-TiO2 and cubic-phased In2S3 (denoted as…
Oxygen vacancies (VO), a common type of point defects in metal oxides materials, play important roles on the physical and chemical properties. To obtain stoichiometric oxide crystal, the pre-existing VO is always removed via careful…
The ferroelectric properties of nanoscale silicon doped HfO$_2$ promise a multitude of applications ranging from ferroelectric memory to energy-related applications. The reason for the unexpected behavior has not been clearly proven and…
The ideal band gap for a photovoltaic active layer for the solar spectrum is around 1.3 eV. However oxides with such values are rare. One of the most studied oxides to date as a photovoltaic active layer is the cuprous oxide Cu2O. Its band…
Solar redox flow batteries (SRFB) have received much attention as an alternative integrated technology for simultaneous conversion and storage of solar energy. Yet, the photocatalytic efficiency of semiconductor-based single photoelectrode,…
Designing materials with controlled photovoltaic response may lead to improved solar cells or photosensors. In this regard, ferroelectric superlattices have emerged as a rich platform to engineer functional properties. In addition,…
Second harmonic generation (SHG) with a material of large transparency is an attractive way of generating coherent light sources at exotic wavelength range such as VUV, UV and visible light. It is of critical importance to improve nonlinear…
The bulk photovoltaic effect (BPVE), arising from broken inversion symmetry in ferroelectrics, offers a distinct pathway toward high-efficiency next-generation photovoltaics. We propose and investigate A/A$^\prime$-ordered double…
Doping cadmium oxide with rare earth (RE) elements is a way to control the band gap and enhance carrier concentration and mobility. This work presents how one of REs, europium, impacts performance of CdO/Si diode. The samples were grown…
Ge-on-Si structures in-situ doped with phosphorus or arsenic via metal organic chemical vapor deposition (MOCVD) were investigated. Surface roughness, strain, threading dislocation desnity, Si-Ge interdiffusion, dopant diffusion, and…
Highly ordered TiO2 nanotube arrays (TNAs) codoped with V and N were synthesized by electrochemical anodization in association with hydrothermal treatment. The samples were characterized by field emission scanning electron microscopy, X-ray…
In the present work we show, how a high pressure hydrogenation of commercial anatase or anatase/rutile powder can create a photocatalyst for hydrogen evolution that is highly effective and stable without the need of any additional…
As a newly identified single-crystalline van der Waals dielectric with a high dielectric constant, Bi2SeO5 plays a pivotal role in advancing 2D electronic devices. In this work, we systematically investigate the defect properties of Bi2SeO5…