Related papers: Circumferential Crack Modeling of Thin Cylindrical…
Ultimately, brittle fracture involves breaking atomic bonds. However, we still lack a clear picture of what happens in the highly deformed region around a moving crack tip. Consequently, we still cannot link nano to atomic-scale phenomena…
The fracture behavior of fiber-ceramics like C/C-SiC strongly depends on the initial damage arising during the production process. We study the transverse cracking of the 90{\deg} ply in [0/90]S cross-ply laminates due to the thermochemical…
In this work, the finite elements method (FEM) is used to analyse the growth of fretting cracks. FEM can be favourably used to extract the stress intensity factors in mixed mode, a typical situation for cracks growing in the vicinity of a…
This contribution presents a diffuse framework for modeling cracks in heterogeneous media. Interfaces are depicted by static phase-fields. This concept allows the use of non-conforming meshes. Another phase-field is used to describe the…
We study the transverse cracking of the 90 degree ply in [0/90] cross-ply laminates by means of a discrete element method. To model the 90 degree ply a two-dimensional triangular lattice of springs is constructed where nodes of the lattice…
Understanding the role played by the microstructure of materials on their macroscopic failure properties is an important challenge in solid mechanics. Indeed, when a crack propagates at a heterogeneous brittle interface, the front is…
Cracking Elements Method (CEM) is a numerical tool to simulate quasi-brittle fractures, which does not need remeshing, nodal enrichment, or complicated crack tracking strategy. The cracking elements used in the CEM can be considered as a…
Numerical simulation of nonlinear elastic wave propagation in solids with cracks is indispensable for decoding the complicated mechanisms associated with the nonlinear ultrasonic techniques in Non-Destructive Testing (NDT). Here, we…
A simple and robust spring-block model obeying threshold dynamics is introduced to study surface fracture of an overlayer subject to stress induced by adhesion to a substrate. We find a novel phase transition in the crack morphology and…
We develop a robust cut finite element method for a model of diffusion in fractured media consisting of a bulk domain with embedded cracks. The crack has its own pressure field and can cut through the bulk mesh in a very general fashion.…
This work presents a practical finite element modeling strategy, the Crack Element Method (CEM), for simulating the dynamic crack propagation in two-dimensional structures. The method employs an element-splitting algorithm based on the…
In this paper, the influence of transverse cracks in a rotating shaft is analysed. The paper addresses the two distinct issues of the changes in modal properties and the influence of crack breathing on dynamic response during operation.…
In this paper we develop a simple finite element method for simulation of embedded layers of high permeability in a matrix of lower permeability using a basic model of Darcy flow in embedded cracks. The cracks are allowed to cut through the…
Strain gradient plasticity theories are being widely used for fracture assessment, as they provide a richer description of crack tip fields by incorporating the influence of geometrically necessary dislocations. Characterizing the behavior…
Discrete element modelling (DEM) is one of the most efficient computational approaches to the fracture processes of heterogeneous materials on mesoscopic scales. From the dynamics of single crack propagation through the statistics of crack…
Phase-field models are a leading approach for realistic fracture problems. They treat the crack as a second phase and use gradient terms to smear out the crack faces, enabling the use of standard numerical methods for simulations. This…
The paper addresses the problem of a Mode III interfacial crack advancing quasi-statically in a heterogeneous composite material, that is a two-phase material containing elastic inclusions, both soft and stiff, and defects, such as…
Fracture in quasi-statically driven systems is studied by means of a discrete spring-block model. Developed from close comparison with desiccation experiments, it describes crack formation induced by friction on a substrate. The model…
The dynamics of a single crack moving through a heterogeneous medium is studied in the quasi-static approximation. Equations of motion for the crack front are formulated and the resulting scaling behaviour analyzed. In a model scalar system…
The problem of crack pattern formation due to thermal shock loading at the surface of half-space is solved numerically using two-dimensional boundary element method. The results of numerical simulations with 100-200 random simultaneously…