Related papers: Ni$_{80}$Fe$_{20}$ Nanotubes with Optimized Spintr…

We report the growth of aluminum (111) thin film by atomic layer deposition (ALD) technique with dimethylethylaminealane (DMEAA) as a precursor. It is found that the metallic underlayer is essential to grow uniform aluminum films by DMEAA…

Although technologically challenging, the integration of ferroelectric thin films with graphene spintronics potentially allows the realization of highly efficient, electrically tuneable, non-volatile memories. Here, the atomic layer…

Niobium nitride (NbN) is a useful material for fabricating detectors because of its high critical temperature and relatively high kinetic inductance. In particular, NbN can be used to fabricate nanowire detectors and mm-wave transmission…

In this paper we demonstrated the thermal Atomic Layer Deposition (ALD) growth at 250 {\deg}C of highly homogeneous and ultra-thin ($\approx$ 3.6 nm) $Al_2O_3$ films with excellent insulating properties directly onto a monolayer (1L)…

This study presents a comprehensive investigation into the exceptional superconducting attributes of titanium nitride (TiN) achieved through plasma-enhanced atomic layer deposition (PEALD) on both planar and intricate three-dimensional (3D)…

We study Ni80Fe20-based permalloys with the relativistic spin-polarized Korringa-Kohn-Rostoker electronic structure method. Treating the compositional disorder with the coherent potential approximation, we investigate how the…

In this paper, the atomic layer deposition (ALD) of ultra-thin films (<4 nm) of $Al_{2}O_{3}$ and $HfO_{2}$ on Au-supported monolayer (1L) $MoS_{2}$ is investigated, providing an insight on the nucleation mechanisms in the early stages of…

Conformal Atomic Layer Deposition (ALD) of nanoparticles is an now an established nanofabrication concept employed by many researchers for applications such as creating diffusion barriers, tuning catalysis, or masking a toxic particle core…

In the present work, different synthesis procedures have been demonstrated to fill carbon nanotubes (CNTs) with $\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ alloy nanoparticles (x = 0.33, 0.5). CNTs act as templates for the encapsulation of magnetic…

The use of Standard Reference Materials (SRM) from the National Institute of Standards and Technology (NIST) for quantitative analysis of chemical composition using Synchrotron based X-Ray Florescence (SR-XRF) and Scanning Transmission…

This paper presents the development of scientific instrumentation for the fabrication of ferromagnetic thin films, by sputtering technique, for the use of 2-inch-diameter targets. Thin films were deposited using Permalloy alloy (Ni80Fe20)…

Research over the years has shown that the formation of the Fe$_3$Si phase in FINEMET (Fe-Si-Nb-B-Cu) alloys leads to superior soft magnetic properties. In this work, we use a CALPHAD approach to derive Fe-Si phase diagrams to identify the…

Two-dimensional ferromagnets with strong perpendicular magnetic anisotropy exhibit magnetic order down to the monolayer thickness, beneficial for energy-efficient spintronic devices. In this work, molecular beam epitaxy has been employed to…

We present a dry surface treatment combining atomic layer etching and deposition (ALE and ALD) to mitigate dielectric loss in fully fabricated superconducting quantum devices formed from aluminum thin films on silicon. The treatment,…

Atomic Layer Deposition (ALD) is a promising technique for growing ultrathin, pristine dielectrics on metal substrates, which is essential to many electronic devices. Tunnel junctions are an excellent example which require a leak-free,…

A tunneling spectroscopy study is presented of superconducting MoN and Nb$_{0.8}$Ti$_{0.2}$N thin films grown by atomic layer deposition (ALD). The films exhibited a superconducting gap of 2meV and 2.4meV respectively with a corresponding…

While DNA origami is a powerful bottom-up fabrication technique, the physical and chemical stability of DNA nanostructures is generally limited to aqueous buffer conditions. Wet chemical silicification can stabilise these structures but…

Laser ablation of Al-Ni alloys and Al films on Ni substrates has been studied by molecular dynamics simulations (MD). The MD method was combined with a two-temperature model to describe the interaction between the laser beam, the electrons…

Silver is a metal which provides the highest reflectivity in the very broad wavelength range as well as the lowest polarization splitting. However, it is not very stable chemically and silver mirrors are easily damaged in a corrosive or…

Aluminum nitride (AlN) is an emerging material for integrated quantum photonics with its excellent linear and nonlinear optical properties. In particular, its second-order nonlinear susceptibility $\chi^{(2)}$ allows single-photon…