Related papers: Six-dimensional matching of intense beam with line…
This work focuses on the incoherent and coherent combination of pulsed laser beams, building on previous research [1] that addressed the combination of continuous-wave laser beams. For the pulsed combination, we have focused on the temporal…
In current accelerators, numerous parameters and monitored values are to be adjusted and evaluated, respectively. In addition, fine adjustments are required to achieve the target performance. Therefore, the conventional…
To realise a planned high-luminosity and high-energy $e^+e^-$-collider, as the ILC, a large amount of positrons have to be produced and the accelerated particles have to be captured and matched according to the damping ring acceptances.…
Many advanced techniques have been developed, tested and implemented in the last decades in almost all circular accelerators across the world to measure the linear optics. However, the greater availability and accuracy of beam diagnostics…
The 6G communication systems use mmWave and MIMO technologies to achieve wide bandwidth and high throughout, leading to indispensable need for beam alignment to overcome severe signal attenuation. Traditional sector-search-based beam…
A lattice beam configuration which results in an isotropic 3D trap near the surface of an atom chip is described. The lattice is formed near the surface of a reflectively coated atom chip, where three incident beams and three reflected…
We report on the development of a radio frequency (RF) linear accelerator (linac) for multiple-ion beams that is made from stacks of low cost wafers. The accelerator lattice is comprised of RF-acceleration gaps and electrostatic quadrupole…
A general technique for synthesizing both planar and conformal beamforming metasurfaces is presented that utilizes full-wave modeling techniques and rapid optimization methods. The synthesized metasurfaces consist of a patterned metallic…
This paper investigates the optimization of beamforming design in a system with integrated sensing and communication (ISAC), where the base station (BS) sends signals for simultaneous multiuser communication and radar sensing. We aim at…
Rapid beam alignment is required to support high gain millimeter wave (mmW) communication links between a base station (BS) and mobile users (MU). The standard IEEE 802.11ad protocol enables beam alignment at the BS and MU through a lengthy…
The demands on performance of advanced linear accelerator based facilities strongly depend on the quality of the particle beams produced by such machines. Indeed, state-of-the-art applications in photon production and high-energy physics…
The beam coupling impedances of small axisymmetric obstacles having a semi-elliptical cross section along the beam in the vacuum chamber of an accelerator are calculated at frequencies for which the wavelength is large compared to a typical…
Devices in a device-to-device (D2D) network operating in sub-THz frequencies require knowledge of the spatial channel that connects them to their peers. Acquiring such high dimensional channel state information entails large overhead, which…
This paper investigates an integrated sensing and communication (ISAC) system where the sensing target is a three-dimensional (3D) extended target, for which multiple scatterers from the target surface can be resolved. We first introduce a…
Three-dimensional (3D) reconstruction from two-dimensional images is an active research field in computer vision, with applications ranging from navigation and object tracking to segmentation and three-dimensional modeling. Traditionally,…
We consider the problem of matching two shapes assuming these shapes are related by an elastic deformation. Using linearized elasticity theory and the finite element method we seek an elastic deformation that is caused by simple external…
Current and next-generation particle tracking detectors will incorporate precision timing capabilities with resolutions approaching tens of picoseconds. Using Technology Computer-Aided Design (TCAD) simulations of Low-Gain Avalanche Diode…
Conventional particle accelerators use linear focusing forces for transverse confinement. As a consequence of linearity, accelerating rings are sensitive to myriad resonances and instabilities. At high beam intensity, uncontrolled…
Integrated sensing and communication (ISAC) is a promising candidate technology for 6G due to its improvement in spectral efficiency and energy efficiency. Orthogonal frequency division multiplexing (OFDM) signal is a mainstream candidate…
Estimating the 6D pose of objects from images is an important problem in various applications such as robot manipulation and virtual reality. While direct regression of images to object poses has limited accuracy, matching rendered images…