Related papers: Critical processing temperature for high performan…

We report epitaxial growth and characterization of GaN thin films on sapphire (0001) substrates using low temperature GaN intermediate layer by plasma assisted molecular beam epitaxy (PA-MBE) technique. As grown and annealed GaN thin films…

Permalloy (Py:Ni81Fe19) exhibits an anisotropic magnetoresistance (AMR) which is very often used to read magnetic signals from storage devices. Py-films of thickness 20nm were prepared by dc-magnetron sputtering in a magnetic field onto…

Hyperbolic metamaterials show exceptional optical properties, such as near-perfect broadband absorption, due to their geometrically-engineered optical anisotropy. Many of their proposed applications, such as thermophotovoltaics or radiative…

Selective solar absorbers (SSAs) with high performance are the key to concentrated solar power systems. Optical metamaterials are emerging as a promising strategy to enhance selective photon absorption, however, the high-temperature…

A comparative study of the physical properties of undoped Zinc Oxide (ZnO) and Al doped Zinc Oxide (AZO) thin films were performed as a function of annealing temperature. The structural properties were analyzed using X-ray diffraction and…

We report annealing induced exchange bias in Fe-Cu-Pt based heterostructures with Cu as an intermediate layer (Fe/Cu/Pt heterostructure) and capping layer (Fe/Pt/Cu heterostructure). Exchange bias observed at room temperature (300 K) is…

Objective of this work was to synthesize Copper doped Zinc Oxide (CZO) films and optimization of process parameters by varying molarity of zinc acetate dehydrate from 0.5 M to 1.0 M, concentration of copper acetate monohydrate from 1% to 5…

The electrical resistivity and the anisotropic magnetoresistance (AMR) was investigated for Ni Co alloys at and below room temperature. The Ni Co alloy layers having a thickness of about 2 um were prepared by electrodeposition on Si wafers…

For its potential as a catalyst, nanoporous gold (NPG) prepared through dealloying of bulk Ag-Au alloys has been extensively investigated. NPG thin films can offer ease of handling, better tunability of the chemistry and microstructure of…

For a detailed study on the semiconductor to metal transition (SMT) in ZnO thin films doped with Al in the concentration range from 0.02 to 2%, we grew these films on (0001) sapphire substrates using sequential pulsed laser deposition. It…

The electronic anisotropy in MgB2, is still a not completely clear topic; high quality c-oriented films are suitable systems to investigate this property. In this work we present our results on MgB2 superconducting thin films grown on MgO…

Digital image correlation (DIC) and crystal plasticity simulation were utilised to study cold dwell behaviour in a coarse grain Ti-6Al alloy at 3 different temperatures up to 230 C. Strains extracted from large volume grains were measured…

Superconducting thin films have been prepared on Si-substrates, using pulsed laser deposition from a target composed of a mixture of Mg and MgB2 powders. The films were deposited at room temperature and post-annealed at 600 degrees C. The…

Tungsten is a promising candidate material for plasma-facing armour components in future fusion reactors. A key concern is irradiation-induced degradation of its normally excellent thermal transport properties. In this comprehensive study,…

Increasing requirements in the sensitivity of interferometric measurements is a common feature of several research fields, from gravitational wave detection to quantum optics. This motivates refined studies of high reflectivity mirrors and…

Selenium has resurged as a promising photovoltaic material in solar cell research due to its wide direct bandgap of 1.95 eV, making it a suitable candidate for a top cell in tandem photovoltaic devices. However, the optoelectronic quality…

a-Nb(x)Si(1-x) thin films with thicknesses down to 25 {\AA} have been structurally characterized by TEM (Transmission Electron Microscopy) measurements. As-deposited or annealed films are shown to be continuous and homogeneous in…

This paper reports a suspended thin-film lithium niobate (LN) piezoelectric resonator platform surviving high annealing temperatures of 550 {\deg}C, among the highest temperature at which the thermal resilience of suspended LN resonators is…

La0.7Ba0.3MnO3 (LBMO):Agx (x = 0.0, 0.1, 0.2, 0.3, and 0.4) composites are synthesized by solid-state reaction route, the final sintering temperatures are varied from 1300 (LBMO1300Ag) to 1400 0C (LBMO1400Ag), and their physical properties…

The in situ annealing conditions of pulsed laser deposited MgB2 films were studied. The precursor films were deposited at 250 C from a stoichiometric MgB2 target in a 120mTorr Ar atmosphere. The films were then in situ annealed at a…