Related papers: Critical processing temperature for high performan…
The report studies transformation of a Ge granular film deposited at room temperature on the Si(001) surface to the Ge/Si(001) heterostructure as a result of rapid heating and annealing at 600C. As a result of the short-term annealing at…
The last decade has increasingly seen the use of silicon photomultipliers (SiPMs) instead of photomultiplier tubes (PMTs). This is due to various advantages of the former on the latter like its smaller size, lower operating voltage, higher…
Protection of silver mirror stacks from environmental degradation before launching is crucial for space applications. Hereby, we report a comparative study of the advanced protection of silver mirror stacks for space telescopes provided by…
Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…
Silicon wafer and multilayer-coated mirror samples were exposed to impact of drops of molten tin to examine the adhesion behavior and cleaning possibilities. The sticking of tin droplets to horizontal substrates was examined for different…
We have used the two-step growth technique, quench condensing followed by an anneal, to grow ultra thin films of silver on glass substrates. As has been seen with semiconductor substrates this process produces a metastable homogeneous…
We investigate the growth conditions for thin (less than 200 nm) sputtered aluminum (Al) films. These coatings are needed for various applications, e.g. for advanced manufacturing processes in the aerospace industry or for nanostructures…
In this paper, an opto-thermal analysis of a moderately heated lightweighted solar telescope mirror is carried out using 3D finite element analysis (FEA). A physically realistic heat transfer model is developed to account for the radiative…
Gallium oxide is an ultra-wide bandgap semiconductor with excellent opto-electronic properties, making it a highly promising material for a wide range of applications and devices. In this article, we report how the optical, morphological,…
Annealing of amorphous optical coatings has been shown to generally reduce optical absorption, optical scattering, and mechanical loss, with higher temperature annealing giving better results. The achievable maximum temperatures are limited…
A hot salt corrosion (HSC) test was performed on the fine-grained titanium alpha-alloy Ti-2.5Al-2.6Zr (Russian industrial alloy PT-7M). The ultrafine-grained (UFG) microstructure in the titanium alpha-alloy was formed via cold Rotary…
The growth of up to 10 monolayer-thick Fe films on a Au(001) surface was investigated during deposition at room temperature and during annealing using low-energy electron diffraction and x-ray photoemission spectroscopy as well as locally…
This investigation deals with the effect of annealing temperature on the structural, topographical and optical properties of Zinc Oxide thin films prepared by sol gel method. The structural properties were studied using X-ray diffraction…
Ruthenium dioxide (RuO$_2$) thin films were synthesized by Chemical Solution Deposition (CSD) on silicon substrates using only water and acetic acid as solvents. The microstructure, phase-purity, electrical and optical properties as well as…
We have measured the electronic heat capacity of thin film nanowires of copper and silver at temperatures 0.1 - 0.3 K; the films were deposited by standard electron-beam evaporation. The specific heat of the Ag films of sub-100 nm thickness…
MgB2 thin films were deposited using Pulsed Laser Deposition (PLD) and ex-situ annealing in Mg atmosphere. The films presented critical temperatures up to 36K and turned out to be preferentially c-oriented both on Al2O3 (r-cut) and MgO(100)…
Optical properties of refractory intermetallic thin films of Au$_{3}$Zr were experimentally investigated for the first time, which show distinctive plasmonic properties in the visible and near infrared region. The films were fabricated…
The effect of vacuum annealing thin films of the compensated ferrimagnetic half-metal Mn2RuxGa at temperatures from 250 to 400 degree Celsius is investigated. The 39.3 nm films deposited on (100) MgO substrates exhibit perpendicular…
The copper ferrite thin films have been deposited by RF sputtering at a 50W rf power. The As-deposited films are annealed in air at $800^{\circ}$C and then slow cooled. The As-deposited (AD) as well as slow cooled (SC) films are studied…
Temperature modulated Alternating Differential Scanning Calorimetric (ADSC) studies show that Se rich Ge0.15Se0.85-xAgx (0 <= x <= 0.20) glasses are microscopically phase separated, containing Ag2Se phases embedded in a Ge0.15Se0.85…