Related papers: Detection of Moving Targets using Coherent Optical…
This work presents a fully-digital high-accuracy real-time calibration procedure for frequency and time alignment of open-loop wirelessly coordinated coherent distributed antenna array (CDA) modems, enabling radio frequency (RF) phase…
We consider the estimation of three-dimensional (3D) radar parameters, namely, bearing or angle-of-arrival (AoA), delay or range, and Doppler shift velocity, under a mono-static multiple-input multiple-output (MIMO) joint communications and…
In the continuous-wave Detection and Ranging technology, simultaneous and accurate range and velocity measurements of an unknown target are typically achieved using a frequency-modulated continuous wave (FMCW) with a heterodyne receiver.…
For the first time, a versatile, eyesafe, compact and direct detection Doppler lidar is developed using upconversion single-photon detection method. An all-fiber and polarization maintaining architecture is realized to guarantee the high…
Remote sensing object detection is a critical technology for real-world applications such as natural resource monitoring, traffic management, and UAV-based rescue. Detecting tiny objects in high-resolution aerial imagery remains challenging…
An intelligent reflecting surface (IRS) consists of passive reflective elements capable of altering impinging waveforms. The IRS-aided radar systems have recently been shown to improve detection and estimation performance by exploiting the…
We demonstrate an optical fiber fault location method based on the frequency response of the modulated fiber optical backscattered signal in a steady state low-frequency step regime. Careful calibration and measurement allows for the…
Dynamic target detection and target tracking are hot issues in the field of image. In order to explore its application value in the field of mobile robot, a dynamic target detection and tracking system is designed based on hexapod robot.…
Doppler spectroscopy has uncovered or confirmed all the known planets orbiting nearby stars. Two main techniques are used to obtain precision Doppler measurements at optical wavelengths. The first approach is the gas cell method, which…
We report on a method to obtain confocal imaging through multimode fibers using optical correlation. First, we measure the fiber's transmission matrix in a calibration step. This allows us to create focused spots at one end of the fiber by…
Today, wide-open, high-resolution Doppler frequency shift (DFS) estimation is essential for radar, microwave/millimeter-wave, and communication systems. Using photonics technology, an effective approach is proposed and experimentally…
This paper proposes a method of passively estimating the parameters of frequency-modulated-continuous-wave (FMCW) radar signals with a wide range of structural parameter values and analyzes how a malicious actor could employ such estimates…
Multiple Input Multiple Output (MIMO) Frequency Modulated Continuous Wave (FMCW) radars operating at 79GHz are compact, light and cost effective devices with low peak-to-average power ratio that have applications in different areas such as…
We present a new technique based on fixed-delay interferometry for high throughput, high precision and multi-object Doppler radial velocity (RV) surveys for extra-solar planets. The Doppler measurements are conducted through monitoring the…
The classical Doppler shift originates from the movement of a target's center of mass, but it does not hold information about the internal dynamics of the scattering object. In contrast, micro-Doppler signatures contain data about the…
Radio Frequency Identification (RFID) is a widely used technology for identifying and locating objects equipped with low-cost RFID transponders (tags). UHF (Ultra High Frequency) RFID operates in frequency bands around 900 MHz and supports…
Continuum manipulators (CMs) are widely used in minimally invasive procedures due to their compliant structure and ability to navigate deep and confined anatomical environments. However, their distributed deformation makes force sensing,…
High mobility environment leads to severe Doppler effects and poses serious challenges to the conventional physical layer based on the widely popular orthogonal frequency division multiplexing (OFDM). The recent emergence of orthogonal time…
This paper details an application which yields significant improvements to the adeptness of place recognition with Frequency-Modulated Continuous-Wave radar - a commercially promising sensor poised for exploitation in mobile autonomy. We…
Coherent LiDAR (Light Detecting And Ranging) is a promising 3D imaging technology that provides significant advantages over more traditional LiDAR systems. In addition to being immune to ambient light, it directly measures the velocity of…