Related papers: Uplink Channel Impulse Response Based Secondary Ca…
Bandwidth request-grant mechanisms are used in 802.16 networks to manage the uplink bandwidth needs of subscriber stations (SSs). Requests may be sent by SSs to the base station (BS) by means of several mechanisms defined in the standard.…
Cellular wireless systems are facing a proliferation of frequency bands over a wide spectrum, particularly with the expansion into FR3. These bands must be supported in user equipment (UE) handsets with multiple antennas in a constrained…
In this paper, we propose a novel reception/transmission scheme for half-duplex base stations (BSs). In particular, we propose a half-duplex BS that employes in-band uplink-receptions from user 1 and downlink-transmissions to user 2, which…
A main challenge in providing connectivity to the low altitude unmanned aerial vehicles (UAVs) through existing cellular network arises due to the increased interference in the network. The increased altitude and favourable propagation…
Time-division duplex (TDD) based massive MIMO systems rely on the reciprocity of the wireless propagation channels when calculating the downlink precoders based on uplink pilots. However, the effective uplink and downlink channels…
Coordinated Multi-Point (CoMP) is known to be a key technology for next generation mobile communications systems, as it allows to overcome the burden of inter-cell interference. Especially in the uplink, it is likely that interference…
Two mobile users communicate with a central decoder via two base stations. Communication between the mobile users and the base stations takes place over a Gaussian interference channel with constant channel gains or quasi-static fading.…
Long range wide area networks (LoRaWAN) technology provides a simple solution to enable low-cost services for low power internet-of-things (IoT) networks in various applications. The current evaluation of LoRaWAN networks relies on…
Multi-tier cellular communication networks constitute a promising approach to expand the coverage of cellular networks and enable them to offer higher data rates. In this paper, an uplink two-tier communication network is studied, in which…
This paper studies two power control problems in energy harvesting wireless networks where one hybrid base station (HBS) and all user equipments (UEs) are operating in in-band full-duplex mode. We consider minimizing the aggregate power…
Linear processing in the spatial domain at the base stations (BSs) and at the users of MIMO cellular systems enables the control of both inter-cell and intra-cell interference. A number of iterative algorithms have been proposed that allow…
With the inherent benefits, such as, better cell coverage and higher area throughput, extra-large scale massive multiple-input multiple-output (MIMO) has great potential to be one of the key technologies for the next generation wireless…
Recently, the paradigm of massive ultra-reliable low-latency IoT communications (URLLC-IoT) has gained growing interest. Reliable delay-critical uplink transmission in IoT is a challenging task since low-complex devices typically do not…
In this paper, the performance of two-way relaying in mixed RF/FSO communication system with a backup RF link is investigated. Uplink RF channels are used to send data of $K$ users to a two-way relay, $R$, whereas FSO link is mainly used to…
The forthcoming 5G cellular network is expected to overlay millimeter-wave (mmW) transmissions with the incumbent micro-wave ({\mu}W) architecture. The overall mm-{\mu}W resource management should therefore harmonize with each other. This…
A Machine Learning (ML) network based on transfer learning and transformer networks is applied to wave propagation models for complex indoor settings. This network is designed to predict signal propagation in environments with a variety of…
In this paper, linear beamforming design for amplify-and-forward relaying cellular networks is considered, in which base station, relay station and mobile terminals are all equipped with multiple antennas. The design is based on minimum…
Due to an ever-increasing number of participants and new areas of application, the demands on mobile communications systems are continually increasing. In order to deliver higher data rates, enable mobility and guarantee QoS requirements of…
Uplink sensing in perceptive mobile networks (PMNs), which uses uplink communication signals for sensing the environment around a base station, faces challenging issues of clock asynchronism and the requirement of a line-of-sight (LOS) path…
This paper assesses the communication link from smart meters to aggregators as (unlicensed) secondary users that transmit their data over the (licensed) primary uplink channel. The proposed scenario assumes: (i) meters' and aggregators'…