Related papers: Interference fading suppression in Phi-OTDR using …
In the past few years, some alternatives to the Orthogonal Frequency Division Multiplexing (OFDM) modulation have been considered to improve its spectral containment and its performance level in the presence of heavy Doppler shifts. This…
Multimode fibers are widely explored for optical communication, imaging and sensing applications. The interference of fiber guided modes generates a speckle pattern, which has been used for high-precision spectroscopy, temperature, and…
In this paper, we investigate the performance of RIS-aided orthogonal time frequency space (OTFS) and orthogonal frequency division multiplexing (OFDM) systems in the presence of oscillator phase noise. OFDM is known to be sensitive to…
Exploring the use of single-mode fibers (SMFs) in high precision Doppler spectrometers has become increasingly attractive since the advent of diffraction-limited adaptive optics systems on large-aperture telescopes. Spectrometers fed with…
A novel Brillouin optical time-domain analysis (BOTDA) system is proposed using intensity-modulated optical orthogonal frequency division multiplexing probe signal and direct detection (IM-DD-OOFDM) without frequency sweep operation. The…
Spatiotemporal modulation approaches have been often employed as alternatives for producing optical non-reciprocity without magneto-optic materials. Unidirectional inter-modal scattering, enabled by either acousto-optic or electro-optic…
Motivated by the looming "capacity crunch" in fiber-optic networks, information transmission over such systems is revisited. Among numerous distortions, inter-channel interference in multiuser wavelength-division multiplexing (WDM) is…
Emitting phased array RF systems have to contend with an ever-increasing number of eavesdroppers as technological advancements provide lower cost and/or more capable radios. Often, eavesdroppers can accumulate sufficient information…
Spectrally and energy efficient orthogonal frequency division multiplexing (SEE-OFDM) is an optical OFDM technique based on combining multiple asymmetrically clipped optical OFDM (ACO-OFDM) signals into one OFDM signal. By summing different…
A coherent, short-length reference arm reflectometer, which utilizes a 76-MHz repetition rate mode-locked fiber laser, was investigated experimentally for long fiber links (> 10 km). The reflectometer combines the advantages of optical…
X-ray imaging is a fast, precise and non-invasive method of imaging which, when combined with computed tomography, provides detailed 3D rendering of samples. Incorporating propagation-based phase contrast can vastly improve data quality for…
The ultimate limits of performance for any classical optical system are set by sub-wavelength fluctuations within the host material, that may be frozen-in or even dynamically induced. The most common manifestation of such sub-wavelength…
The low-interference N-continuous orthogonal frequency division multiplexing (NC-OFDM) system [25], [26] is investigated in terms of power spectrum density (PSD) and bit error rate (BER), to prove and quantify its advantages over…
Efficient removal of impulsive noise (IN) from received signal is essential in many communication applications. In this paper, we propose a two stage IN mitigation approach for orthogonal frequency-division multiplexing (OFDM)-based…
Multiple Input Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) is a promising transmission scheme for high performance broadband wireless communications. However, this technique suffers from a major drawback which…
Integrated sensing and communication (ISAC) is a promising technology in future wireless systems owing to its efficient hardware and spectrum utilization. In this paper, we consider a multi-input multi-output (MIMO) orthogonal frequency…
Focal ratio degradation (FRD) is a major contributor to throughput and light loss in a fibre spectroscopic telescope system. We combine the guided mode theory in geometric optics and a well-known model, power distribution model (PDM), to…
The time-modulated array is a simple array architecture in which each antenna is connected to an RF switch that serves as a modulator. The phase shift is achieved by digitally controlling the relative delay between the periodic modulating…
In the intelligent reflecting surface (IRS)-enhanced wireless communication system, channel state information (CSI) is of paramount importance for achieving the passive beamforming gain of IRS, which, however, is a practically challenging…
Self-heterodyne techniques are widely used for laser phase noise characterization due to their simple experimental setup and the removed need for a reference laser. However, when investigating low-noise lasers, optical delay paths shorter…