Related papers: Evaluating Global Blockage engineering parametriza…
The dune morphodynamics study is under highly focused recently, due to aeolian process induced nonlinear correlation to sediment modification over bedform. Surface stress, inflicted by aloft upcoming wind, impacts, crucially, the sediment…
We conduct wall-modeled LES (WMLES) of a pressure-driven three-dimensional turbulent boundary layer (3DTBL) developing on the floor of a bent square duct to investigate the predictive capability of three widely used wall models, namely, a…
Wind-wave interaction involves wind forcing on wave surface and wave effects on the turbulent wind structures, which essentially influences the wind and wave loading on structures. Existing research on wind-wave interaction modeling ignores…
Current design constraints have encouraged the studies of aeroacoustics fields around compressible jet flows. The present work addresses the numerical study of subgrid scale modeling for unsteady turbulent jet flows as a preliminary step…
Offshore wind structures are subject to deterioration mechanisms throughout their operational lifetime. Even if the deterioration evolution of structural elements can be estimated through physics-based deterioration models, the…
In the last decade, progresses in additive manufacturing (AM) have paved the way for optimized heat exchangers, whose disruptive design will depend on predictive numerical simulations. Typical AM rough surfaces show limited resemblance to…
US wind power generation has grown significantly over the last decades, in line with the number and average size of operating turbines. However, wind power density has declined, both measured in terms of wind power output per rotor swept…
The placement of wind turbines on a given area of land such that the wind farm produces a maximum amount of energy is a challenging optimization problem. In this article, we tackle this problem, taking into account wake effects that are…
The integration of more intermittent generation, energy storage, and dynamic loads on top of a competitive market environment requires future grids to handle increasing diversity of power injection states. Grid planners need new tools and…
The rapid increase in scale and sophistication of offshore wind (OSW) farms poses a critical challenge related to the cost-effective operation and management of wind energy assets. A defining characteristic of this challenge is the economic…
Probabilistic and intermittent output power of wind turbines (WT) is one major inconsistency of WTs. Battery Energy Storage Systems (BESSs) are a suitable solution to mitigate this intermittency which use to smoothen the output power…
With the rising costs of conventional sources of energy, the world is moving towards sustainable energy sources including wind energy. Wind turbines consist of several electrical and mechanical components and experience an enormous amount…
A novel approach is proposed to reduce, compared to the conventional binning approach, the large number of aeroelastic code evaluations that are necessary to obtain equivalent loads acting on wind turbines. These loads describe the effect…
Efficiency increase is seen as one of the main goals in any energy converting device. In this direction, the present study aims to demonstrate that large-scale wind turbines can still be improved in order to generate larger amounts of…
Accurate estimates of wind speeds at wind turbine hub heights are crucial for both wind resource assessment and day-to-day management of electricity grids with high renewable penetration. In the absence of direct measurements, parametric…
The state-of-the-art in wind-farm flow-physics modeling is Large Eddy Simulation (LES) which makes accurate predictions of most relevant physics, but requires extensive computational resources. The next-fidelity model types are…
Tall buildings are often subjected to steady and unsteady forces due to external wind flows. Measurement and mitigation of these forces becomes critical to structural design in engineering applications. Over the last few decades, many…
This work presents a technique to estimate on-line the global momentum of an electric power system. It exploits the footprint of the principal frequency system dynamics. Probing tones are injected by a grid-forming converter-interfaced…
Recent extreme tropical cyclones caused extensive damages to critical civil infrastructure globally. To better capture the unique hurricane wind characteristics, a large eddy simulation (LES) Hurricane Boundary Layer (HBL) model is…
We propose a novel model-based approach for constructing optimal designs with complex blocking structures and network effects, for application in agricultural field experiments. The potential interference among treatments applied to…