Related papers: Order-of-Magnitude Beam Current Improvement in Com…

230 MeV proton beam out of a cyclotron was delivered into a Zebra multi layered IC detector (IBA) calibrated in terms of penetration range in water. The analysis of the measured Bragg peak determines penetration range in water which can be…

Muon beams are customarily obtained via $K/\pi$ decays produced in proton interaction on target. In this paper we investigate the possibility to produce low emittance muon beams from electron-positron collisions at centre-of-mass energy…

Using H2+ ions is expected to mitigate the two major impediments to accelerating very high currents in cyclotrons, due to lower space charge at injection, and stripping extraction. Planning for peak currents of 10 particle milliamps at 800…

The beam energy measurement system is of great importance and profit for both BEPC-II accelerator and BES-III detector. The system is based on measuring the energies of Compton back-scattered photons. Many advanced techniques and precise…

Electron beam ion traps (EBIT) are ideal tools for both production and study of highly charged ions (HCI). In order to reduce their construction, maintenance, and operation costs we have developed a novel, compact, room-temperature design,…

Design studies, for accelerator modules based on an injector cyclotron and a superconducting ring cyclotron able to accelerate H$_2^+$ molecules, are presented. H$_2^+$ molecules are stripped by a foil creating a proton beam, with a maximum…

Experimental and theoretical activities are underway at CERN with the aim of examining the feasibility of a very-high-flux neutrino source. In the present scheme, a high-power proton beam (some 4 MW) bombards a target where pions are…

A gas-filled reverse cyclotron for the thermalisation of energetic beams is under construction at NSCL/MSU. Rare isotopes produced via projectile fragmentation after in-flight separation will be injected into the device and converted into…

A new compact linear proton accelerator project (named LINAC 7) for multiple low-current applications, designed and built in-house at the Beam Laboratory of the University of the Basque Country (UPV/EHU) is described. The project combines…

The future accelerator facility for beams of ions and antiprotons at Darmstadt will provide antiproton beams of intensities that are two orders of magnitude higher than currently available. Within the foreseen scheme, antiprotons can be…

Short bunch proton beams are of great significance for the applications of white neutron beams and muon beams. The accelerator complex of China Spallation Neutron Source (CSNS) was designed to support the applications mainly based on…

A high-intensity hyperon beam was constructed at CERN to deliver Sigma- to experiment WA89 at the Omega facility and operated from 1989 to 1994. The setup allowed rapid changeover between hyperon and conventional hadron beam configurations.…

We present an investigation into beam steering and radiation emission by sub-GeV electrons traversing bent silicon crystals. Using 855, 600, and 300~MeV electron beams at the Mainz Microtron (MAMI), we explored orientational coherent…

In ion cancer therapy, high-intensity ion beams are used to treat tumors by taking advantage of the Bragg-Peak. Typical ion therapy centers use particle rates up to $10^{10}$ ions/second for treatment. On the other hand, such intensities…

This paper presents an 8 GeV Rapid Cycling Synchrotron (RCS) option for Project X. It has several advantages over an 8 GeV SC linac. In particular, the cost could be lower. With a 2 GeV 10 mA pulsed linac as injector, the RCS would be able…

A new beam dump has been designed, built, installed and operated to withstand the future proton beam extracted from the Proton Synchrotron Booster (PSB) in the framework of the LHC Injector Upgrade (LIU) Project at CERN, consisting of up to…

Applying the space-charge forces of a low-energy electron beam can lead to a significant improvement of the beam-particle lifetime limit arising from the beam-beam interaction in a high-energy collider [1]. In this article we present the…

Neutrino beam with about 300 MeV in energy, high-flux and medium baseline is considered a rational choice for measuring CP violation before the more powerful Neutrino Factory will be built. Following this concept, a unique neutrino beam…

New kind of positron sources for future linear colliders, where the converter is a tungsten crystal oriented on the <111> axis, has been studied at CERN in the WA103 experiment. In such sources the photons which create the $e^+ e^-$ pairs…

The intrinsic constraints in the amplitude of the accelerating fields sustainable by radio-frequency accelerators demand for the pursuit of alternative and more compact acceleration schemes. Among these, plasma-based accelerators are…