Related papers: Constant TMR magnetic field sensor detectivity wit…
Levitated ferromagnetic systems are expected to have significant potential in precision magnetic field sensing by leveraging mechanical isolation to minimize mechanical contact and associated noise. Here, we report the implementation of a…
We report on room temperature 1/f noise in fully epitaxial Fe(45nm)/MgO(2.6nm)/Fe(10nm) magnetic tunnel junctions (MTJs) with and without carbon doping of the Fe/MgO bottom interface. We have found that the normalized noise (Hooge factor)…
Measurements of the $^{1}$H-NMR spectrum of a small ($\sim$ 4 $\mu$g) single crystal of the organic conductor $\lambda$-(BETS)$_{2}$FeCl$_{4}$ are reported with an applied magnetic field $\bf{B}$$_{0}$ = 9 T parallel to the a-axis in the…
A multimode microcavity sensor based on a self-interference microring resonator is demonstrated experimentally. The proposed multimode sensing method is implemented by recording wideband transmission spectra that consist of multiple…
Magnetic field measurement including a temperature compensation is essential for a magnetic field sensor. This study investigates a magnetic surface acoustic wave (MSAW) sensor in a reflective delay line configuration with two acoustic…
Non-contact vital sign monitoring has many advantages over conventional methods in being comfortable, unobtrusive and without any risk of spreading infection. The use of millimeter-wave (mmWave) radars is one of the most promising…
We observe a dc voltage peak at ferromagnetic resonance (FMR) in samples consisting of a single ferromagnetic (FM) layer grown epitaxially on the $\mathit{n-}$GaAs (001) surface. The FMR peak is detected as an interfacial voltage with a…
Temperature- and magnetic field-dependent electrical noise and electrical resistivity measurements were carried out on epitaxial thin films of a large bandwidth La0.7Sr0.3MnO3 and a disordered intermediate bandwidth (La0.5Pr0.2)Ba0.3MnO3…
Local material inhomogeneities can strongly influence magnetization dynamics and macroscopic magnetic properties, yet detecting such defects from magnetic imaging data remains challenging when thermal fluctuations and experimental noise…
Magnetic resonance spectroscopy (MRS) offers significant diagnostic potential but is inherently constrained by low signal-to-noise ratio (SNR). While increasing the main magnetic field strength B_0 is theoretically linked to increased SNR,…
An approach to the problem of 1/f voltage noise in conductors is developed based on an uncertainty relation for the Fourier-transformed signal. The quantum indeterminacy caused by non-commutativity of the observables at different times…
Many modern electronic devices utilize linear Hall sensors to measure current and the magnetic field, as well as to perform switching and latching operations. Smartphones, laptops, and e-readers all work with very low (sub-mA) currents. To…
Developing a non-invasive, accurate vector magnetometer that operates at ambient temperature and is conducive to miniaturization and is self-calibrating is a significant challenge. Here, we present an unshielded three-axis vector…
Quantum sensors based on spin-defect relaxation have become powerful tools for detecting faint magnetic signals, yet their operation has remained largely confined to low magnetic fields and gigahertz frequencies. Extending such sensors into…
We develop a high frequency, wide bandwidth radiometer operating at room temperature, which augments the traditional technique of Johnson noise thermometry for nanoscale thermal transport studies. Employing low noise amplifiers and an…
We examine the increase in voltage noise in capacitive sensor circuits due to the stray-capacitance introduced by connecting cables. We have measured and modelled the voltage noise of various standard circuits, and we compare their…
The accuracy of Milne-Eddington (ME) inversions, used to retrieve the magnetic field vector, depends upon the signal-to-noise ratio (SNR) of the spectro-polarimetric observations. The SNR in real observations varies from pixel to pixel,…
The design and performance of a low-noise, modular cryogenic probe, applicable to a wide range of measurements over a broad range of working frequencies, temperatures, and magnetic fields is presented. The design of the probe facilitates…
Magnetometry with nitrogen-vacancy (NV) centers has so far been measured via emission of light from NV centers or via absorption at the singlet transition at 1042 nm. Here, we demonstrate a phenomenon of broadband optical absorption by the…
The impact of measurement imperfections on quantum metrology protocols has not been approached in a systematic manner so far. In this work, we tackle this issue by generalising firstly the notion of quantum Fisher information to account for…