Related papers: A Radiation-Balanced Silica Fiber Amplifier
Erbium-based materials have long been recognized for their important telecom-band applications, yet their widespread adoption in integrated optoelectronics has been hindered by two fundamental limitations: the difficulty in achieving high…
Silicon Photomultipliers (SiPMs) are an excellent candidate for the development of large-area light sensors. Large SiPM-based detectors require low-noise pre-amplifiers to maximize the signal coupling between the sensor and the readout…
Superconducting Parametric Amplifiers (SPAs) have seen great interest in recent years due to their high gain and quantum limited noise performance. Among these amplifiers, resonant SPAs have been widely developed for experiments where ultra…
We report on an anti-resonant hollow-core fiber (AR-HCF) designed for stable transmission of laser light in a broad wavelength range of 250 nm to 450 nm. We tested for wavelengths of 300 nm and 320 nm. The characterized fiber shows a low…
A novel technique for divided-pulse amplification is presented in a proof-of-principle experiment. A pulse burst, cut out of the pulse train of a mode-locked oscillator, is amplified and temporally combined into a single pulse. High…
In this work, we propose and numerically investigate a two-dimensional microlaser based on the concept of bound states in the continuum (BIC). The device consists of a thin gain layer (Rhodamine 6G dye-doped silica) sandwiched between two…
Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast…
Mode-locked fiber laser technology to date has been limited to sub-3 {\mu}m wavelengths, despite significant application-driven demand for compact picosecond and femtosecond pulse sources at longer wavelengths. Erbium- and holmium-doped…
The Linac Coherent Light Source (LCLS) is the first x-ray laser user facility based upon a free electron laser (FEL). In addition to many other stringent requirements, the LCLS XFEL requires extraordinary beam quality to saturate at 1.5…
We have fabricated a wide-bandwidth, high dynamic range, low-noise cryogenic amplifier based on a superconducting kinetic inductance traveling-wave device. The device was made from NbTiN and consisted of a long, coplanar waveguide on a…
The viscosity of an optical fibre over 1000 to 1150 {\deg}C is studied by inscribing an optical fibre Bragg grating that can withstand temperatures up to 1200 {\deg}C and monitoring fibre elongation under load through the Bragg wavelength…
We report on the design and whole characterization of low-noise and affordable-cost Yb-doped double-clad fiber amplifiers operating at room temperature in the near-infrared spectral region at pulse repetition rate of 160 MHz. Two different…
We present measurements of silica optomechanical resonators, known as bottle resonators, passively cooled in a cryogenic environment. These devices possess a suite of properties that make them advantageous for preparation and measurement in…
Laser cooling of atoms usually necessitates several laser frequencies. Alkaline atoms, for example, are cooled by two lasers with a frequency difference in the Gigahertz range. This gap cannot be closed with simple shifting techniques.…
We report the design and demonstration of novel 2 $\mu$m band Watt-level fiber amplifiers, fiber lasers, and wideband ASE sources that are pumped with broad spectrum Watt-level ASE sources instead of conventional fiber laser pumps. We show…
Modelocked frequency comb lasers have always operated with a single pulse circulating in the laser cavity. This meant that each laser technology had an associated limit on pulse repetition rate. Achieving higher rates required different…
We have fabricated highly-luminescent samples with erbium-doped amorphous silicon sub-oxide (a-SiOx<Er>) layers on SiO2/Si substrates. The layers are designed to provide a resonance with large modal overlap with the active material and with…
Lasers are the workhorse of quantum engineering in the atomic-molecular-optic community. However, phase noise of the laser, which can be especially large in popular semiconductor-based lasers, can limit fidelity of operation. Here, we…
We present a continuous, narrow-linewidth, tunable laser system that outputs up to 14.0 W at 770 nm. The light is generated by frequency doubling 18.8 W of light from a 1540 nm fiber amplifier that is seeded by a single mode diode laser…
An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in…