Related papers: Arc plasma ablation of quartz crystals
We present one-dimensional numerical simulations describing the behavior of solid matter exposed to subpicosecond near infrared pulsed laser radiation. We point out to the role of strong isochoric heating as a mechanism for producing highly…
We performed self-consistent modeling of the atmospheric-pressure plasmas produced by arc discharges. Special numerical procedure for coupling of the plasma current, emission current, ion current, sheath voltage drop, heat fluxes at…
The production of ions via laser ablation for the loading of radiofrequency (RF) ion traps is investigated using a nitrogen laser with a maximum pulse energy of 0.17 mJ and a peak intensity of about 250 MW/cm^2. A time-of-flight mass…
Pulsed laser ablation is an increasingly prevalent method for fast ion trap loading of various species, however characteristics of the ablation target source material can affect the ion-loading process. One factor which can reduce the…
A molecular-dynamics thermal annealing model is proposed to investigate the mechanisms involved in picosecond pulsed laser ablation of crystalline silicon. In accordance with the thermal annealing model, a detailed description of the…
A device has been built and tested, in which a ceramic superconducting cathode and a copper anode cause electrical discharges in low pressure gases, at temperatures between 50 and 70 K. The electrodes are connected to a capacitors array…
The extreme ultraviolet plasma emission from liquid microsized argon droplets exposed to intense near-infrared laser pulses has been investigated. Emission from the warm dense matter targets is recorded in a spectral range in between 16 and…
Charge-state-resolved ion energy-time-distributions of pulsed Cu arc plasma were obtained by using direct (time dependent) acquisition of the ion detection signal from a commercial ion mass-per-charge and energy-per-charge analyzer. We find…
A 30-fs, 800 nm, 1 kHz femtosecond was used to photoablate diamond across radiant energy doses of 1 - 500 kJ/cm^2, with fluences of 10 - 50 J/cm^2 and, pulse counts from 100 to 10,000. The objective was to maximise material removal while…
Using a modified self-consistent one-dimensional hydrodynamic lagrangian fluid code, laser ablation of solid copper by ultrashort laser pulses in vacuum was simulated to study fundamental mechanisms and to provide a guide for drilling…
A model has been proposed for estimation of plasma parameters of explosive electron emission pulses in vacuum arc discharge. It based on transition through the critical state during the explosion and allow to predict the cathode spot plasma…
Ultrafast laser ablation is an extremely precise and clean method of removing material, applied in material processing as well as medical applications. And due to its violent nature, it tests our understanding of the interplay between…
We model an interaction of femtosecond laser pulses (800 nm, 100 fs, 1-100 TW/cm$^2$) with metal targets (Al, Au, Cu, and Ni). A detailed analysis of laser-induced phase transitions, melting wave propagation and material decomposition is…
The additional pumping of energy into arc plasma flow by the self-consistently formed radially directed beam of high-energy electrons for evaporation of micro-droplets is considered. The radial beam appears near the inner cylindrical…
We report the near-field ablation of material from cellulose acetate coverslips in water and my- oblast cell samples in growth media, with a spot size as small as 1.5 {\mu}m under 3 {\mu}m wavelength radiation. The power dependence of the…
Arc plasmas have promising applications in many fields. To explore their property is of interest. This paper presents detailed pressure-based finite volume simulation of argon arc. In the modeling, the whole cathode region is coupled to…
The ablation of solid tin surfaces by an 800-nanometer-wavelength laser is studied for a pulse length range from 500 fs to 4.5 ps and a fluence range spanning 0.9 to 22 J/cm^2. The ablation depth and volume are obtained employing a…
The condensation of zinc oxide nano clusters produced in gas phase has been evidenced in the ablation of a ZnO solid target by a pulsed ArF laser. We compare the spatio-temporal evolution of the shape of ZnO ablated plasma plume, both in…
In view of future applications of plasma-based particle accelerators, within the fields of high-energy physics and new light sources, the capability of plasma sources to operate at high repetition rates is crucial. In particular for…
K-line profiles emitted from a warm dense plasma environment are used for diagnostics of Ar droplet plasmas created by high energy laser pulses. We observe temperature gradients within the Ar droplet from cold temperatures of the order of…