Related papers: Impact of thermo-optical effects in coherently-com…
In this work, we derive and present the coupled amplitude equations to describe the evolutions of different spectral components in different transverse modes for Raman fiber amplifiers (RFAs). Both the effects of the four-wave-mixing in the…
Direct thermal-to-electric energy converters typically operate in the linear regime, where the ratio of actual maximum power relative to the ideal maximum power, the so-called fill factor (FF), is 0.25. By increasing the FF one can…
Using a numerical model we study the frequency dependence of mode coupling gain due to stimulated thermal Rayleigh scattering in step index, Yb doped, fiber amplifiers. The frequency at the gain peak is shown to vary with core size, doping…
The present work deals with a curvature sensor that consists of two segments of asymmetric multicore fiber (MCF) fusion spliced with standard single mode fiber (SMF). The MCF comprises three strongly coupled cores; one of such cores is at…
Heterogeneous processors with architecturally different cores (CPU and GPU) integrated on the same die lead to new challenges and opportunities for thermal and power management techniques because of shared thermal/power budgets between…
A lot of research is focused on all-optical signal processing, aiming to obtain effective alternatives to existing data transmission platforms. Amplification of light in fiber optics, such as in Erbium-doped fiber amplifiers, is especially…
We investigate lensless endoscopy using coherent beam combining and aperiodic multicore fibers (MCF). We show that diffracted orders, inherent to MCF with periodically arranged cores, dramatically reduce the field of view (FoV) and that…
The use of short lengths of large core phosphate glass fibre, doped with high concentrations of Er or Er:Yb represents an attractive route to achieving high power erbium doped fibre amplifiers (EDFAs) and lasers (EDFLs). With the aim of…
A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on…
This article deals with the prediction of thermomechanical properties of fiber reinforced composites using several micromechanics models. These include strength of material approach, Halpin-Tsai equations, multi-phase mechanics of materials…
In this contribution we investigate the transversal mode instability behavior of an ytterbium doped commercial 20/400 fiber and obtain 2.9 kW of output power after optimizing the influencing parameters. In this context, we evaluate the…
Increasing requirements in the sensitivity of interferometric measurements is a common feature of several research fields, from gravitational wave detection to quantum optics. This motivates refined studies of high reflectivity mirrors and…
Wavefront shaping enables precise control of light propagation through multimode fibers (MMFs), facilitating diffraction-limited focusing for applications such as high-resolution single-fiber imaging and high-power fiber amplifiers. While…
Harnessing the potential wide-ranging quantum science applications of molecules will require control of their interactions. Here, we use microwave radiation to directly engineer and tune the interaction potentials between ultracold calcium…
In recent years, the growing scale of programmable neutral-atom arrays has led to an increasing demand for higher-power Rydberg excitation light. Although pulsed amplifiers deliver higher peak power than continuous-wave lasers, their use…
An ultrafast fiber chirped-pulse amplification laser system based on coherent combination of 16 ytterbium-doped rod-type amplifiers is presented. It generates 10 mJ pulse energy at 1 kW average power and 120 fs pulse duration. A partially…
The modulation efficiency of a tubular-lattice hollow-core fiber (HCF) by means of flexural acoustic waves is investigated in detail for the first time. The main acousto-optic properties of the HCF are evaluated employing 2D and 3D models…
Mode division multiplexing (MDM) in optical fibers enables multichannel capabilities for various applications, including data transmission, quantum networks, imaging, and sensing. However, MDM optical fiber systems, usually necessities…
Cold plasma of power 13W has been applied on step index plastic optical fibers. It is used to study the ability for any variations in the optical parameters that are effective in communication. The effect of plasma on the optical…
We compared the performance of two post-compression techniques, a gas-filled hollow-core fiber (HCF) and a multi-pass cell (MPC), using a high-power ytterbium-doped fiber laser. The HCF produced 27 fs pulses from 230 fs inputs at >50%…