Related papers: TwoPhaseFlow: An OpenFOAM based framework for deve…
This paper presents a new solver developed in OpenFOAM for the modeling of lubricant in the narrow gap between two surfaces inducing hydrodynamic pressures up to few gigapascal. Cavitation is modeled using the homogeneous equilibrium model.…
Prediction of two-phase boiling flows using the computational fluid dynamics (CFD) approach is very challenging since several sub-models for interfacial mass, momentum and energy transfer in such flows are still not well established and…
A new OpenFOAM application to simulate multiphase flows in porous media is formulated and tested. The proposed solver combines the Eulerian multi-fluid formulation for a system of phase fractions with Darcy's law for flows through porous…
This paper presents the development of a density-based solver suitable for cavitating flows in the OpenFOAM framework. In this solver, the thermodynamic equilibrium mixture approach is adopted to model the presence of and the phase…
Phase field models for two-phase flow with a surfactant soluble in possibly both fluids are derived from balance equations and an energy inequality so that thermodynamic consistency is guaranteed. Via a formal asymptotic analysis, they are…
Two-phase outflows refer to situations where the interface formed between two immiscible incompressible fluids passes through open portions of the domain boundary. We present in this paper several new forms of open boundary conditions for…
Two new control volume solvers multiFluidInterFoam and rheoMultiFluidInterFoam are presented for the simulation of Newtonian and non-Newtonian n-phase flows, respectively, fully accounting for interfacial tension and contact-angle effects…
In this paper a numerical methodology for surface tension modeling is presented, with an emphasis on the implementation in the OpenFOAM framework. The methodology relies on a combination of (i) a well-balanced approach based on the Ghost…
The study of multiphase flows in porous media is fundamental to various fields, including oil recovery, CO2 sequestration, hydrogeology, and others. Accurate predictions of fluid behavior in these systems can enhance process efficiency…
OpenCAEPoro is a parallel numerical simulation software developed in C++ for simulating multiphase and multicomponent flows in porous media. The software utilizes a set of general-purpose compositional model equations, enabling it to handle…
This paper presents a solver using the Level-Set method for incompressible two phase flows with surface tension. A one fluid approach is adopted where both phases share the same velocity and pressure field. The Level Set method has been…
Blood clotting involves the coupled processes of platelet aggregation and coagulation. Simulating clotting under flow in complex geometries is challenging due to multiple temporal and spatial scales and high computational cost. clotFoam is…
An open-sourced multiphase Darcy-Brinkman approach is proposed to simulate two-phase flow in hybrid systems containing both solid-free regions and porous matrices. This micro-continuum model is rooted in elementary physics and volume…
The purpose of this communication is to discuss the simulation of a free surface compressible flow between two fluids, typically air and water. We use a two fluid model with the same velocity, pressure and temperature for both phases. In…
A wide variety of interface capturing methods have been introduced for simulating two-phase flows throughout the years. However, there is a noticeable dearth of literature focusing on objective comparisons between these methods, especially…
The extraordinary aerial agility of hummingbirds and insects continues to inspire the design of flapping-wing drones. To replicate and analyze such flight, computational fluid dynamics (CFD) simulations that couple flow solvers with rigid…
Phase interfaces in melting and solidification processes are strongly affected by the presence of convection in the liquid. One way of modeling their transient evolution is to couple an incompressible flow model to an energy balance in…
Detailed understanding of the coupling between fluid flow and solid deformation in porous media is crucial for the development biomedical devices and novel energy technologies relating to a wide range of geological and biological processes.…
The Phase-Field Method (PFM) is employed to simulate two-phase flows with the fully-coupled Cahn-Hilliard-Navier-Stokes (CHNS) equations governing the temporal evolution. The methodology minimizes the total energy functional, accounting for…
In the present study, two schemes named face discernment and flux correction are proposed to achieve single-phase transportation of free charge in multiphase electrohydrodynamic(EHD) problems. Many EHD phenomena occur between air and…