Related papers: 3D Printed PVDF
Nanopore sensing is a key technology for single-molecule detection and analysis. Solid-state nanopores have emerged as a versatile platform, since their fabrication allows to engineer their properties by controlling size, shape, and…
Ferroelectrics have shown potential as a promising alternative material for future photovoltaic applications. Observance of high open circuit voltages in ferroelectric thin films, have generated considerable interest in the field of…
This research investigates the feasibility of producing affordable, functional acoustic guitars using 3D printing, with a focus on producing structural designs with proper tonal performance. Conducted in collaboration with William…
The next generation of soft electronics will expand to the third dimension. This will require the integration of mechanically-compliant three-dimensional functional structures with stretchable materials. This study demonstrates…
In this work, a way to improve the piezoelectric properties of Bi0.5Na0.5TiO3 (BNT) is demonstrated by introducing a new poling protocol. A customized corona poling unit with a low temperature (77 K) sample stage is suggested. Using this…
Nitride perovskites are supposed to exhibit excellent properties as oxide analogues and may even have better performance in specific fields for their more covalent characters. However, till now, very limited nitride perovskites have been…
Feedstock deformation during 3D printing of continuous fiber composites is a critical challenge in path planning and a main driver in the generation of manufacturing defects. The proposed work addressed the feedstock deformation during the…
The structure of a single antiparallel ferroelectric domain wall in LiNbO3 is quantitatively mapped by piezoelectric force microscopy (PFM) with calibrated probe geometry. The PFM measurements are performed for 49 probes with the radius…
The dipoles in ferroelectric copolymer P(VDF-TrFE) can be driven by electric field, introducing phonon transport modulations through polarizing molecular chains. The thermal conductivity in single 75/25 P(VDF-TrFE) nanofibers is found to…
The conductivity of $\alpha$-polyvinylidene fluoride ($\alpha$-PVDF) is obtained from dielectric measurements performed in the frequency domain at several temperatures. At temperatures above the glass-transition, the conductivity can be…
360-degrees digitalization of three-dimensional (3D) solids using a projected light-strip is a well established technique. These profilometers project a light-strip over the solid under analysis while the solid is rotated a full revolution.…
We established a production method of a good millimeter-wave absorber by using a 3D-printed mold. The mold has a periodic pyramid shape, and an absorptive material is filled into the mold. This shape reduces the surface reflection. The…
In the development of active animate materials, electromechanical coupling is highly attractive to realize mechanoresponsive functionality. Piezoelectricity is the most utilized electromechanical phenomenon due to the wide availability of…
This paper presents in-situ X-ray computed tomography (CT) experiments used to study the flow behavior within a conventional hot-end of a fused filament fabrication printer. Three types of experiments were performed to better understand the…
We report nearly single phase Pb(Zr0.14Ti0.56Ni0.30)O3-delta(PZTNi30) ferroelectric having large remanent polarization (15-30 {\mu}C/cm2), 0.3-0.4 V open circuit voltage (VOC), reduced band gap (direct 3.4 eV, and indirect 2.9 eV), large ON…
In material extrusion additive manufacturing, the extrusion process is commonly controlled in a feed-forward fashion. The amount of material to be extruded at each printing location is pre-computed by a planning software. This approach is…
3D-printed materials are used in many different industries (automotive, aviation, medicine, etc.). Most of these 3D-printed materials are based on ceramics or polymers whose mechanical properties vary with frequency. For numerical modeling,…
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is widely used to build optoelectronic devices. However, as a hygroscopic water-based acidic material, it brings major concerns for stability and degradation, resulting in…
Coupling between electrical and mechanical phenomena is a near-universal characteristic of inorganic and biological systems alike, with examples ranging from ferroelectric perovskites to electromotor proteins in cellular membranes.…
The transfer of graphene grown by chemical vapor deposition (CVD) using amorphous polymers represents a widely implemented method for graphene-based electronic device fabrication. However, the most commonly used polymer, poly(methyl…